Vacuum Regulation Monitoring Milking Equipment For Sale In Baltimore

Replacement filters available. This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa).

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Overall dimensions 5" in diameter and 12" high. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and...

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel...

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Part number "348-36" on schematic diagram.

Safety Valve for Stabilvac Seperate styles.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Overall dimensions 6" in diameter and 11-1/4" high. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed...

Dual scale, Hg and KPA. Dial is 3-7/8" in. Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT. Fits assemblies with 5 HP pump.

Also available in 60:40, 65:35, and 70:30 ratios. The Vacuum Pulsator for heavy duty working conditions Simple, reliable, variable-speed alternating pulsator " Dustop " air filter for improved filtration of microscopic dust particles Cover design for...

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

3/8" ID, 5/8" OD, 13 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Vacuum Tubing significantly outperforms rubber.

1/4" ID, 1/2" OD, 18 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Twin Vacuum Tubing significantly outperforms rubber.

Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge. Gallon weighs 8 lbs.

PD306 is a digital pressure gauge with one relay output and RS485 communication. It is applied in various fields, such as petroleum, hydraulics, rubber and plastics, dyeing and printing, textile for pressure control and measurement.

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors.

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.