Vacuum Components Milking Equipment For Sale In South Dakota

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

Replacement End Cap for 15" tank with three 3" inlets.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

The Kaeser OMEGA41P is a 15HP tri-lobe style vacuum pump that weighs 201 lbs. The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given.

Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof. Vacum Pre-Air Filter with 3" pump connection for 3" single or duble vacuum line .

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.

Part number "353-06" on schematic diagram.

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. For 4-1/4" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

Each pump has a multi-time module to program on/off, run times and delay times from 1 second to 45 minutes. L5000 Plus Peristaltic 3-Pump Panel can be retrofitted to existing pipeline wash control systems or used with optional Programmer (#1201354) to...

Stainless Steel Fit ‘em All Jetter Rack will hold virtually any milking claw including Delaval. Jetter Rack is sold individually, or as part of complete kit. The 120112 has rounded insert for holding the jetter cups.

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof. Vacum Pre-Air Filter with 4" pump connection for 3" single or duble vacuum line .

If standard sizes are not suitable, we will customize a tank for you. End caps feature four inch solvent-weld and are domed for strength. Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable.

Vacuum Pre-Air Filter with 3" pump connection for 3" single or duble vacuum line. A cap is included for closing off the unused vacuum line in single configurations. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic...

Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.

Straight Silencer with 2.5" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 7.5 to 10 HP pump.

• Drains in End shield. • Stainless Steel “Full Fact Nameplate. • USDA Epoxy Finish. 1-1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Replacement Drain 1-1/2".

White PVC Plastic Gate Valve for vacuum shut-off features female slip X slip fittings and stainless steel shaft and paddle.