Vacuum Components Milking Equipment For Sale In Philadelphia

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Replacement Filter Cartridge for Fresh Air.

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

Use with a standard automotive-type filter. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes 2 each nipple adapter no. 160219, black transflow hose, and 90 degree elbow.

Washer included. Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe.

Dual scale, Hg and KPA. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum...

For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description. The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary.

Use with a standard automotive-type filter. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes 2 each nipple adapter no. 160218, black transflow hose, 90 degree elbow and one pulsator cover no.160222.

Threaded Style screws directly into the tubing so no clamp is required. Sized to fit all sizes of PVC or stainless steel tubing. A quality product at a reasonable price, with a guaranteed not to leak vacuum.

3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Part number "353-06" on schematic diagram.

Replacement End Cap for 15" tank with 1-1/2" drain opening.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Part number "348-28" on schematic diagram.

Replacement Blank End Cap for 15" tank.

Silicone Grease (Required when replacing Peristaltic Pump Tubes) RFE Silicone Grease f / Peristaltic Pump Tubing.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

Double-wall corrugated box with expanded polystyrene corner pads. A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid,...

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). The design allows for quick installation, and the unit can be cleaned and serviced in less than...

Washguard motors meet all applicable UL and CSA standards. Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant...

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Case of 4 gallons.