Vacuum Components Milking Equipment For Sale In Nevada

Part number "348-11" on schematic diagram.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Straight Brass Stall Cock; 3/8" thread.

1.5" Female NPT mounting connections. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

For 3-1/2" opening. Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Replacement 12" Cover for Pre-Filters 160201, 160206, 160208, 160237 and 160238.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Factory calibrated for accuracy. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Other fine features include... Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity,...

Washguard motors meet all applicable UL and CSA standards. Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. 2HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460...

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. .Vacum Pre-Air Filter with 4" pump connection for 4" single or duble vacuum line .

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Mounting kit and 11/2” drain are included. End caps feature a four inch solvent-weld and are domed for strength. This 100 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof.

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. Vacum Pre-Air Filter with 3" pump connection for 3" single or duble vacuum line .

The timer is easily programmed to deliver the precise amount of cleaner required for the pump, which in most cases is a very small amount. Designed to work with the Coburn Vacuum Pump Cleaner, a neutral, ready-to-use degreasing cleaner which removes dust,...

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description. The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary.

Fits Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators. Sized to fit all sizes of PVC or stainless steel tubing. A quality product at a reasonable price, with a guaranteed not to leak vacuum.

A cap is included for closing off the unused vacuum line in single configurations. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic filter screen.

This CIP Assembly features Fit-'em-All Stainless Steel Jetter Rack and 120117 Jetter Cups for Boumatic. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, Stainless Steel Distributor, U-Bolts and Nuts.

Replacement Filter Cartridge for Fresh Air.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.