Vacuum Components Milking Equipment For Sale In Missouri

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. Washguard motors meet all applicable UL and CSA standards. 3HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460...

Sized to fit all sizes of PVC or stainless steel tubing. A quality product at a reasonable price, with a guaranteed not to leak vacuum. Die-cast, rust-free metal construction. Fits Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators.

Part number "348-11" on schematic diagram.

All Kaeser Vacuum Pumps feature... Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. The CFM's listed indicate the pump's performance at sea level at 68 degrees...

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Pre-Air Filters are packaged in 350-lb. Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof. Vacum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line .

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

• All Stainless Steel Screws. • Works with most competing milk pumps - C-Face. • Drains in End shield. • USDA Epoxy Finish. • Dual Voltage 115/230. • Special Moisture Resistant Interior Coatings.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Specify length (up to 12 ft.) and number, size and placement of openings. Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable. Mounting kit and 1-1/2” drain are included.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

If standard size is not suitable, we will customize a tank for you. Mounting kit and 11/2” drain are included. Specify length (up to 12 ft.) and number, size and placement of openings.

Dual scale, Hg and KPA. Factory calibrated for accuracy. Glycerine fill assures accuracy by providing a cushion against vibration. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT...

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle. For 1-1/2 line.

Straight Brass Stall Cock; 3/8" thread.

5/8" OD Sanitary Spigot Closure with Chain fits 9/16" ID.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Replacement Drain - 1 1/4"

Use the Coburn stainless steel claw hanger whenever you need to hang a Delaval or other style claw upside-down. Ideal for storage and cleaning in place, this claw hanger includes hangar and U-bolt for installation on stall tubing.

Weighs 121 Lbs. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

Replacement End Cap for 15" tank with three 3" inlets.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 5 HP pump. Straight Silencer with 2" NPT.