Vacuum Components Milking Equipment For Sale In Michigan

160218, black transflow hose, 90 degree elbow and one pulsator cover no.160222. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

Angle Brass Stall Cock; 3/8" thread.

Part number "348-11" on schematic diagram.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

1.5" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Pre-Air Filters are packaged in 350-lb. Double-wall corrugated box with expanded polystyrene corner pads. A plug is included to seal off the unneeded outlet in single configuration.

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

Part number "353-06" on schematic diagram.

Replacement Drain - 1 1/4"

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Pre-Air Filters are packaged in 350-lb. Double-wall corrugated box with expanded polystyrene corner pads. A plug is included to seal off the unneeded outlet in single configuration.

Washguard motors meet all applicable UL and CSA standards. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact name plate.

The timer is easily programmed to deliver the precise amount of cleaner required for the pump, which in most cases is a very small amount. The Cleaning System includes peristaltic pump with control, straight injector and 10 ft.

Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement End Cap for 15" tank with 1-1/2" drain opening.

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT. Fits assemblies with 5 HP pump.

This 100 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof. Mounting kit and 11/2” drain are included.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2.5" NPT. Fits assemblies with 7.5 to 10 HP pump.

Replaces Milk-Rite 7103. Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.