Vacuum Components Milking Equipment For Sale In Los Angeles

Overall dimensions 5" in diameter and 12" high. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Includes 2 each nipple adapter no. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. 160218, black transflow hose, 90 degree elbow and one pulsator cover no.160222.

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "348-11" on schematic diagram.

1HP with a 5/8" shaft in a stainless steel finish, three phase, 56HC frame, 208-230/460 voltage, and 3600 RPM. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact...

A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

End caps feature a four inch solvent-weld and are domed for strength. Mounting kit and 11/2” drain are included. This 100 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

Includes 2 each nipple adapter no. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. 160219, black transflow hose, and 90 degree elbow. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover.

Safety Valve for Stabilvac Seperate styles.

Replacement Filter Cartridge for Fresh Air.

• Works with most competing milk pumps - C-Face. • All Stainless Steel Screws. • Dual Voltage 115/230. • Stainless Steel “Full Fact Nameplate. • USDA Epoxy Finish. • 303 Stainless Steel Shaft.

1/2" thread Vacuum Drain Valve is made out of unbreakable plastic.

There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to...

Measuring only 32" long x 21" wide x 37" high and weighing 450 lbs., the 10HP Kaeser Compact is shipped fully assembled complete with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation. This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups.

If standard size is not suitable, we will customize a tank for you. End caps feature four inch solvent-weld and are domed for strength. This 50 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof,...

Designed to work with the Coburn Vacuum Pump Cleaner, a neutral, ready-to-use degreasing cleaner which removes dust, dirt and milkfat from lobed vacuum pumps, the cleaning system delivers cleaner to the vacuum pump inlet air stream to automatically clean...