Vacuum Components Milking Equipment For Sale In Jacksonville

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.

Features green plastic body with replaceable foam filter. Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening. Kit includes Gauge, pipe nipple, elbow, coupling and instructions.

Replacement End Cap for 15" tank with 1-1/2" drain opening.

1.5" Female NPT mounting connections. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change...

Straight Brass Stall Cock; 3/8" thread.

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

Replacement End Cap for 15" tank with one 3" inlet

Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops. Grey Powder-Coat finish. For 2-1/4" opening.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 50 to 60 HP pump. Straight Silencer with 8" NPT.

160219, black transflow hose, and 90 degree elbow. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.

Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops. Grey Powder-Coat finish. For 2-1/2" opening.

Weighs 121 Lbs. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to...

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle. For 1-1/2 line.

The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary. This Kaeser Compact Assembly includes heavy durable grey stand and belt guard with easy belt tension adjustment.

Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic filter screen. A cap is included for closing off the unused vacuum line in single configurations.

End caps feature four inch solvent-weld and are domed for strength. If standard sizes are not suitable, we will customize a tank for you. Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable.

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

• USDA Epoxy Finish. • Works with most competing milk pumps - C-Face. • Special Moisture Resistant Interior Coatings. • Stainless Steel “Full Fact Nameplate. • 303 Stainless Steel Shaft.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.