Vacuum Components Milking Equipment For Sale In Indiana

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Replacement Filter Cartridge for Fresh Air.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening. Kit includes Gauge, pipe nipple, elbow, coupling and instructions.

Dual scale, Hg and KPA. Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Rust-inhibiting and will not form sludge. Gallon weighs 8 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

Part number "348-35" on schematic diagram.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Features green plastic body with replaceable foam filter. Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators.

Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Straight Silencer with 2.5" NPT. Fits assemblies with 7.5 to 10 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Washguard motors meet all applicable UL and CSA standards. Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. 2HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460...

For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description. The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers tall the variables and recommends the right size pump for the job. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air...

For 2-1/2" opening. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops. Grey Powder-Coat finish.

Fits Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators. Die-cast, rust-free metal construction. Sized to fit all sizes of PVC or stainless steel tubing. A quality product at a reasonable price, with a guaranteed not to leak vacuum.

Vacuum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic filter screen.

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen,...

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes Filter cover, cartridge and base. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover.

At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32. There is about 4 CFM needed per cow. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many...

Vacuum Pre-Air Filter with 4" pump connection for 3" single or duble vacuum line. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic filter screen.

3" Female NPT mounting connections. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Hardware is included. CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval.

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen,...