Vacuum Components Milking Equipment For Sale In Fort Worth

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement Drain - 1 1/4"

Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement Filter Cartridge for Fresh Air.

The Coburn Compact featuring the Kaeser Tri-Lobe Vacuum Pump is a vacuum pump assembly occupying a minimum amount of space in the milking barn or parlor. This Kaeser Compact Assembly includes heavy durable grey stand and belt guard with easy belt tension...

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

• 303 Stainless Steel Shaft. • Dual Voltage 115/230. 1-1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.

The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35. There is about 4 CFM needed per cow. Weighs 121 Lbs. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the...

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge. Quart weighs 2.5 lbs.

This 50 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof. End caps feature four inch solvent-weld and are domed for strength.

Use with a standard automotive-type filter. Includes Filter cover, cartridge and base. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

Replacement End Cap for 15" tank with 1-1/2" drain opening.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Mounting kit and 11/2” drain are included. Specify length (up to 12 ft.) and number, size and placement of openings. If standard size is not suitable, we will customize a tank for you.

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

A cap is included for closing off the unused vacuum line in single configurations. Vacuum Pre-Air Filter with 6" pump connection for 4" single or duble vacuum line. Our Pre-Filters include automatic drain valve, clamps, gasketed removable lid, and plastic...

Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). The design allows for quick installation, and the unit can be cleaned and...

Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact...

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.