Vacuum Components Milking Equipment For Sale In Baltimore

For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Straight Brass Stall Cock; 3/8" thread.

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Double-wall corrugated box with expanded polystyrene corner pads. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust stops. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe.

Part number "348-11" on schematic diagram.

Replacement Drain 1-1/2".

Vacuum Balance Tanks feature full 1/2” thick PVC construction and are absolutely moisture-proof, rust-proof, and corrosion-proof. This is 30 Gallon Vertical Balance Tank with stand.

Replacement End Cap for 15" tank with one 3" inlet

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

2" Female NPT mounting connections. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.

Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration.

Safety Valve for Stabilvac Seperate styles.

Part number "353-06" on schematic diagram.

Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.