Vacuum Components Milking Equipment For Sale In Austin

Replacement Filter Cartridge for Fresh Air.

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 35 to 106 cfm (1,000 to 3,000 liters/min) and will maintain vacuum from 10” to 15” Hg (34 to 50 kPa).

Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. 160219, black transflow hose, and 90 degree elbow. Includes 2 each nipple adapter no.

1HP with a 5/8" shaft in a stainless steel finish, three phase, 56HC frame, 208-230/460 voltage, and 3600 RPM. Leeson Washguard motors are designed and built for extended life in the wet, humid environment of the dairy.

Replacement End Cap for 15" tank with 1-1/4" drain opening.

A quality product at a reasonable price, with a guaranteed not to leak vacuum. Fits Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators. Sized to fit all sizes of PVC or stainless steel tubing.

Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller. Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

• Drains in End shield. 1-1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy. • All Stainless Steel Screws.

Replacement Stainless Steel screen for old-style Pre-Air Filters. Dimensions 10-7/8"W by 18"L by 5/16".

Straight Brass Stall Cock; 3/8" thread.

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

If standard size is not suitable, we will customize a tank for you. This 50 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof.

Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. For 4-1/4" opening. Grey Powder-Coat finish. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly...

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

Black ABS Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and ABS paddle. For 1-1/2 line.

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

CIP components are sold individually, or as part of complete kit. Stainless Steel Fit ‘em All Heavy Duty Jetter Rack will hold virtually any milking claw including Delaval. Hardware is included.

White PVC Plastic Gate Valve for vacuum shut-off features female slip X slip fittings and stainless steel shaft and paddle.

This CIP Assembly for BouMatic features Stainless Steel jetter rack and 120117 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7101.

Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.