Vacuum Components Milking Equipment For Sale In Arizona

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function...

2" Female NPT mounting connections. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and...

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion. Five-gallon pail.

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

• All Stainless Steel Screws. • USDA Epoxy Finish. • Special Moisture Resistant Interior Coatings. • Works with most competing milk pumps - C-Face. • 303 Stainless Steel Shaft.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Replacement Drain 1-1/2".

Grey Powder-Coat finish. Raincap-Style Anti-Reversing Valve is for vacuum pumps or any kind of exhaust pipe. Hinged cover and stamped metal construction is engineered to open with the slightest pressur, and to close tightly and instantly when exhaust...

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Mounting kit and 1-1/2” drain are included. End caps feature four inch solvent-weld and are domed for strength. This 30 gallon Vacuum Balance Tank features full 1/2” thick PVC construction and is absolutely moisture-proof, rust-proof, and corrosion-proof.

Washguard motors meet all applicable UL and CSA standards. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact name plate.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT. Fits assemblies with 5 HP pump.

Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge. Quart weighs 2.5 lbs.

Replacement End Cap for 15" tank with 1-1/4" drain opening.

Sanitary Spigot Closure with Chain, fits 5/8" ID.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

5/8" OD Sanitary Spigot Closure with Chain fits 9/16" ID.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Coburn Fresh Air Filter fits up to 3" PVC pipe and features a one-piece, durable plastic cover. Includes 2 each nipple adapter no. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function...

Coburn"s Black Plastic Distributor Tee is smooth throughout for efficient water flow and is an economical alternative to the Stainless Steel Distributor Tee.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7102.