Vacuum Components Milking Equipment For Sale In Alaska

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). This separate-style regulator, which divides the servo valve and the main control valve into two parts...

Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Quart weighs 2.5 lbs.

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

Replacement End Cap for 15" tank with one 3" inlet

Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and...

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will...

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

• USDA Epoxy Finish. 1 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy. • Stainless Steel “Full Fact Nameplate.

Part number "348-36" on schematic diagram.

White PVC Plastic Gate Valves for vacuum shut-off feature female slip X slip fittings as well as stainless steel shaft and paddle.

Replacement Blank End Cap for 15" tank.

Replacement End Cap for 15" tank with 1-1/4" drain opening.

This CIP Assembly for DeLaval and IBA features Drawer-Style Stainless Steel Jetter Rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Smooth, sanitary, rubber Jetter Cups are tapered for better cleaning of the inflation head. Replaces Milk-Rite 7101.

Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels. Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and...

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Double-wall corrugated box with expanded polystyrene corner pads--UPS shippable. Mounting kit and 1-1/2” drain are included. End caps feature four inch solvent-weld and are domed for strength.

5/8" OD Sanitary Spigot Closure with Chain fits 9/16" ID.

This CIP Assembly for DeLaval and IBA features Stainless Steel jetter rack and 120115 jetter cups. Like our other CIP Kits, it also includes Smooth Approved Barbless Tee, Duckbill Drain, U-Bolts and Nuts for installation.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.