Used Equipment Windrowers And Swathers For Sale In Fairless Hills

Kuhn GA 7302DL Twin Gyrorake Side Delivery, 2pt Semi Mount, Cat II or III, Self Steering Rear Wheels, Working Width 23'-24'

Working width: 22' 5"-24' 5".

Opticut silage baler 14 knives, 4 x 6 bales, VT50 monitor, 14,000 bales.

20' stock chopper.

10" x 1/4" wall DOM flail tube. Rubber shielding. 2-3/16" Drive Shaft Bearing. Special hood design for windrowing, 1/4" steel hood throughout, 1/4" x 14" OD X 18" pitch end delivery auger.

$7,500 Discount Available - bale wrapper round or square

Ditch bank mower. 3pt CAT II hitch, 7; working width, 540, min PTO HP 65, max PTO HP 90, 24 knives, HYD Side shift.

Output and pressure required: Standard 11-16 gpm at 6,000 psi. Transport width (ft) 8'2". Required tractor hydraulic connections: 1 SA with 3/4" free return. Monitor: VT 50 touch screen color monitor, including battery cable.

.$3,500 Discount Available

Twin Gyro Rake, 2 pt Semi Mounted, 2 Rotors, 11 Arms per Rotor, 4 Tines per Arm, Working Width 22.5" to 24.5", Clean Swept Width 21'10" to 23'9",PTO-S.WWE2280 13/8-6 F5/1R 910, Rear Steering, Wheel Set 10/75-15.3, Lights and Signaling, Hyd Adj of Working...

Pickup working width: 23'10", Pickup Height: 5/8"-3 1/8". Discharge Capability: Right, Left, or Split. Standard self-contained hydraulic drive. 2/3/3N or drawbar hitch type. 2 pickups & conveyors.

Belco Econo Wrap EW-450S Bale Wrapper, 3 Pt Hitch, Stationary Wrapper

Up to 4 bales a minute. In line bale wrapper. Does round bales up to 6'6" and square bales up to 5'6". Hand held remote with 200' range. Rear tires are 10/16.5, Front Tires are 11L-15.

8 wheel, 3 pt rake.

GA 3200 GT GYRORAKE, 9 Arms, 3 Tires Per Arm, Working Width 10'6", Clean Swept 7'3", 540 PTO, 20 hpmin

12 Wheel Rake, Working Width 18'9" to 23'4", Includes Optional 55" Kicker

VB 3195 Opticut Round Baler, Pivoting Pickup Wheels, Bale Kicker,

4 rotors, 7 tine arms per rotor, working width 17' 1", PTO required 20 hp minimum, 1 DA hydraulic connection .

14 Wheel Rake, Tandem Axles, Working Width up to 28'

$6,000 Discount Available - Opticut 23, high silage, 3D wrapping unit w/ pivoting pre stretchers.

Working width is 8'6", 2 rotors, 7 tine arms per rotor, drawbar, 540 PTO speed, transport width is 9'10", transport height is 9'2", 1,170 lbs, Tractor hydraulic equipment: 1 DA, requires 20 hp tractor power.

$8,000 Discount Available - 3x4 bales,6 knotters, Double knotter, Dual hydraulic-driven fans, 30 twine capacity (rolls), opticut, Individual hydraulic knife protection, Hydraulic brakes, 170 hp/127 kW, 2 SA and 1 DA