Used Equipment Winch Oil Field Trucks For Sale In Commerce City

Job Done on this Truck, 1982 Autocar Bed / Pole Truck, Has pole troughs but no poles, Cummins 400 BC3, Jake Brake, 9 Speed Trans., 4 Speed aux. W/ Power Tower, 20K front with Torque Rods, 80K Clark Planetary Rears, with 100K Solid Walking Beam Suspension,...

Walking beam susp, 46k rears, 16k front, 12k steerable drop, double locking rears, air sliding fifth wheel, 80% rear tires, 95% steers, 25,000 LBS winch, 6NZ Cat

A/C Condition: Good, A/C, Differential Lock, State DOT, 6x4, Turbo, Wet Kit

Mack with Galvanized cab, lots of custom aluminum extras power steering, A/C, dual air ride seats EM6 - 300 Mack engine Mack 5 speed main box Spicer 1241-CT aux Trans. Bed and roller this truck is one "Hell for stout 30 ton truck" , with a good bath and...

EM6-300 Mack engine 300 HP., new Mack reman. Engine some time in 1987 or 88

Model Year: 1998 Make: Volvo Model: ACL Engine Type: L6, 10.8L (661 CID) Cab Type: Conventional Cab Drive Line Type: 6x4 GVWR Class: Class 8: 33,001 lb And Over Transmission: Fuller Transmission/Rockwell Rear Axle Brake System: Air Fuel Type: Diesel Horsepower:...

6x4, Headache Rack, Turbo, Wet Kit

From back of cab to end of frame with 13ft. 45,000 pound mechanical Braden winch. 8 inch full tail roller.

2007 Kenworth C500B

1984 International 1954, engine model DT466, manual transmission, overall length 28, WB 206, good condition

2007 Kenworth T800

If you want a clean, one owner, low miles, pre emissions, big power, winch tractor " This Is It "

2005 Western Star 4900

2007 Kenworth C500B 2 Spd. Transmission, 21' 8' 6" Bed, Tail Roll, No Gin Poles, Braden W150RRA Winch, Braden MS3020B Winch, 3rd Winch Mounted Under Bed on Right Front

2007 Kenworth T8000B Cummins ISX530, 18 spd, 2 spd Aux. Tranmission, Walking Beam Suspension, 374" WB, 32k Fronts, FR2P32S Planetaries (Rears - 68k lbs), 22' x 9' Bed, Gin Poles, Tail Roll, Braden W150 Winch, Braden MS3020B Winch, 183K miles

2002 NUTTALL TRI AXLE LOWBOY TRAILER 50' X 102" 50 TON CAP, METAL FLOOR, ROLLING TAIL W/ POP UP ROLLER TIRES: 255/70R 22.5, GVWR 23000#, GAWR 1st: 35000# 2nd: 3# 3rd: 35000#

2003 Scona Oilfield Lowboy, 50 ton folding neck, 10' Wide X 53' Long, Rear Deck is 43' from back of neck to tail roller, 41" deck height, tri-axle air ride suspension with 25,000 LBS.

500 Gal.) 3408 450 HP. I'm sure I missed something else but those are the major items. Cat engine, 5 speed trans., Fold down lights for night operation, walk ways and hand rails, Gardner Denver PAH Triplex Pump, covered operators station, mud mix tank...

2006 Loadcraft Loadcraft 60'

2012 TRAIL-EZE TE120-0F59 OIL FIELD DETACHABLE GOOSENECK TRAILER 59' 6", MAIN DECK: 45', UPPER DECK: 14' 6", AXLES: (4) 25,000 lb. W/ AIR LIFT ON 1st & 4th, EQUIPPED WITH 147940# GVWR DETACHABLE NECK, POP-UP DECK ROLLERS, 102" ROLLING TAILBOARD, 2 KING...

2002 Kalyn, Narrow Neck 3 Axle Oilfield lowboy, air ride suspension with dump valve, 40" deck, neck roller, and tail roller, older 255/70R22.5 rubber on hub pilot steel wheels, 10 D rings, 4 pipe stake holders, new king pin, HD neck pick up, (Kaylen is...

2006 Loadcraft Loadcraft 60' 60 Ton Quad Axle, Air Ride Suspension, Tail Roll, 44' Long x 94" Wide Deck, Air-Ride Suspension, Air Brakes, 255/70R22.5 Tires, 146,000 lb. GVWR, 60' Overall Length

10' TOP 43' Lower With Beavertail 36" Deck Height JULY DEL

61" Axle Space 5 Lights Per Side Very Sharp IN STOCK

CPS Belly Dump, Rear Liftable 10'7" Spread from Frt. Axle to Rear Axle Center, Low Profile 3-Axle, Alum Wheels, Lift Axle, Lightweight #15,200

23.5 CU YDS., Lightweight #14,900 +/- 3%, White Paint,