Used Equipment Vacuum For Sale In Spokane Valley

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize...

Safety Valve for Stabilvac Seperate styles.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize...

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize...

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stable and reliable vacuum is essential to the consistent operation of the...

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize...

At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

Part number "348-36" on schematic diagram.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.