Used Equipment Vacuum For Sale In Pleasant Valley

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. FeaturingA a serial port and a variety of additional internal features, the Digimet...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Safety Valve for Stabilvac Seperate styles.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

1.5" Female NPT mounting connections. Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

3" Female NPT mounting connections. Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to...

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

Part number "348-36" on schematic diagram.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

2" Female NPT mounting connections. Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description. The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary.