Used Equipment Vacuum For Sale In Pauls Valley

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 35 to 106 cfm (1,000 to 3,000 liters/min) and will maintain vacuum from 10” to 15” Hg (34 to 50 kPa).

Safety Valve for Stabilvac Seperate styles.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50...

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). Replacement filters available.

Overall dimensions 5" in diameter and 12" high. 1.5" Female NPT mounting connections. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). Replacement filters available.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Overall dimensions 7" in diameter and 12.5" high. 3" Female NPT mounting connections. May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). Replacement filters available.

Weighs 121 Lbs. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Part number "353-06" on schematic diagram.

Part number "348-36" on schematic diagram.

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Overall dimensions 6" in diameter and 11-1/4" high. 2" Female NPT mounting connections. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15".