Used Equipment Tillage For Sale In Hawarden

Krause Model # 4885 Land Builder, 5 Shank Disc-Chisel-Disc, 24 Inch Blades with 11 Inch Spacing, Rock Flex Disc Gang with Adjustable Gang Pitch, Hydraulic Fore-Aft Adjustment, Auto Rest Shanks with New Points and Wear Bars, Adjustable Rear Blades, Walking...

Cushion Bearing Standards with Adjustable Scrapers. 9 Auto Reset Chisel Shanks with 1750 lb. Hydraulic Depth Adjustment on Both Front and Rear Disc Gangs. III Single Lip Hitch. Round 1 3/4 Inch Gang Shaft with Triple Lip Seal Type Trunnion Bearings.

Wil-Rich Pull Type Disc Chisel

IV Hitch, 14 Inch Diameter Reels with 7/8" Round Rods, Spring Loaded Down Pressure for All Reels, Four Front Mounted Swivel Gauge Wheels On Wings, Single Point Front Mounted Depth Control.

2018 Farm King Model #4572 Rotary Tiller, 69" Tillage width, Overall Width 78", Category I Three-Point Hitch, Heavy Duty Oil Bath Gearbox with #80 Heavy Chain, 203 RPM Rotor Speed, 8 1/2" Side Shift, 540 RPM PTO with Slip Clutch Protection, 1/4" x 2 1/4"...

Sunflower Model # 1434-26 Flexible Tandem Disk, 26 Foot Tandem Disk, 23 1/2" Disc Blades, Walking Tandems, Hydraulic Fore & Aft Control, Three Bar Coil Tine Harrow.

Landoll 7431-26 Vertical Tillage

Landoll Model # 6230-36 Flex Wing Tandem Disk, 35 Foot 10 Inch Harrowing Width, C-Cushion Bearing Standards, Walking Tandems on Center and Wing Sections, 2 Front Mounted Swivel Gauge Wheels on Wings, Single point Front Mounted Depth COntrol, Hydraulic...

2012 Case IH Model #RMX370 True Tandem Disk, 31 Foot Working Width, 9 Inch Blade Spacing, 23 1/2", 4 Gauge, Shallow Concavity Front Disc Blades, 23 3/4", 4 Gauge, Moderate Concavity Rear Disc Blades, 18 Degree Angle of Cut on Front & Rear Gangs, 1.5"...

Sunflower Model #1434-26 Flexible Tandem Disk, 26 Foot 2 Inch Cutting Width, Triple Sealed, Greaseable, Trunnion Style Gang Bearings, Gauge Wheels, Hydraulic Self-Leveling System with Level Indicator, Walking Tandems Axles, 6 Bolt Hubs & Wheels with 11L...

2009 Landoll Model # 6230-30 Tandem Disk, 30 foot 4 Inch Working Width, 8 3/4" Blade Spacing, C-Cushion Bearing Standards, Walking Tandems on Center & Wing Sections, Front Mounted Swivel Gauge Wheels on Wings, Single Point, Front Mounted Depth Control,...

Point Load, 10 Inch Sweeps with 9 Inch Spacing, Heavy Duty Walking Tandems, Sunflower High Residue Spike Drag, 6 Rows of 3/4 Inch by 16 Inch Round Teeth. Sunflower Model # 6333 - 28 Land Finisher, 27' 9" Sweep Cutting Width, 29' Disc Cutting Width, 19...

Case IH #4700 36' Vibra Shank Field Cultivator

2013 Landoll Model # 2211-11 Disc Chisel Disc,13 Foot 9 Inch Working Width, 24" Front and Rear Disc Blades, Hydraulic Depth Adjustment on Both Front & Rear Gangs, 11 Auto-Reset Chisel Shanks with 1750 Pound Point Load, Walking Tandems, Self Leveling Hitch...

Sunflower Model # 1444-40 Four Section Tandem Disk, 40 Foot Cutting Width, 8-3/4 Inch Blade Spacing, 22-1/2 Inch Front Blades, 23 Inch Rear Blades, Walking Tandem Axles on Center and Wing Sections, Gates Heavy Duty Three Bar Coil Tine Harrow with 1/2...

2004 Sunflower Model #1434-29 Foot Flexible Tandem Disk, 28' 11" Cutting Width, 8 3/4" Blade Spacing, 23 Inch Front Blades, 23 1/2" Rear Blades, Adjustable 4" Rigid Scrapers, High Strength, Greaseable, Trunnion Style Gang Bearings, Gauge Wheels with 8.00...

Hydraulic Disc Gang Depth Adjustment. Single Point Depth Control. Five Bar Coil Tine Harrow on Rear. Adjustable Tine Pitch. 20 Inch Disc Blades with 7.5 Inch Spacing. John Deere Model # 726 Land Finisher, 38 Foot, 3 Inch Harrowing Width.

LandollModel # 6230-29 Flex Wing Tandem Disk, 29 Foot Harrowing Width, 24" Disc Blades, Hydraulic Fore And Aft Attachment, New Landoll Heavy Duty Three Bar Coil Time Harrow on rear.

Landoll Model # 6231-30 Flex Wing Tandem Disk, Disk, 30' Harrowing Width, 24" Disc Blades, Hydraulic Fore And Aft Attachment, New Landoll Heavy Duty Three Bar Coil Time Harrow On Rear.

Per Foot, Three 42 Inch Round Drums with 5/8 Inch Wall Thickness, Heavy Duty Four Bolt Flange Type Bearings, 2 7/16 Inch Replaceable Shafts, Hydraulic Lift System with Rear Wheel Hydraulic Steering Package, Six Bolt Hubs & Wheels with ST235/80 x R16 Tires,...

2012 NEW Landoll Model # 2110-11 Coulter Chisel Plow, 13 Foot 9 Inch Working Width, 22 Inch Coulters on 7 1/2" Spacing, Round 1 3/4 Inch Gang Shaft, 5 3/4 Inch Cast Spools, C-Cushion Bearing Standards with Triple Lip Seal Trunnion Bearings, Auto-Reset...

J & M Model #TF212, 35 Foot Pull Type Crumbler, Hydraulic Folding Wing Sections. Two Rows of Standard 13 Inch Diameter Rolling Baskets. Extendable Tongue. Four 7.60 by 15 Flotation Transport Tires.

Farm King Landscaping Rake, 84" Wide, 5/16" x 1" Spring Steel, 3 Position Forward Angle Adjustment, 2 Position Reverse Angle Adjustment, 3 Point Category l Hitch.

2016 Landoll 7821-20 HSL, (High Speed Disk), 20 Foot Working Width, 24 Inch Notched Blades, Spring Tine Roller on Rear.

New Landoll Model # 6231-21 Tandem Disk 21 Foot Harrowing Width With 24 Inch Disc Blades, Hydraulic Fore & Aft Attachment, Heavy Duty Three Bar Coil Time Harrow On Rear.

Point Load, 49 - 9 Inch Sweeps with 8 Inch Shank Spacing, Walking Tandems on Center and Wing Sections with 380/55R x 16.5 Tires, Landoll Three Bar Coil Tine Harrow and Rolling Baskets.

Spring Loaded Down Pressure. Rear Mounted 14" Diameter Conditioner Reels with Hydraulic Raise & Lowering Cylinders. 45 Foot Wide 24" Disc Blades. 18 Degree Gang Angle on Front & Rear.