Used Equipment Sweepers Broom Equipment For Sale In East Syracuse

SCHWARZE A7 TORNADO A/C Condition: New, A/C, 4x2

DUAL STEER SCHWARZE M6 SWEEPER

2017 Bradco 84" Rock bucket with 3" tine spacing.

48" BUCKET FOR SWINGER , Fits On (machine Category): Wheeled Excavators, Width: 48" WAIN ROY, 595

524-527 FORK FRAME & 42" FORKS

30" CP HD BUCKET FOR A JOHN DEERE 130/135, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth, Width: 30"

LABOUNTY HDR100S, HDR100209, GRAPPLE ATTACHMENT, SK480 MOUNTING, 52" WIDE, MANUAL POWERED, 2/3 TINE, # 71314

SS 42" FORKS & FRAME 3750#

GEITH HD40-036, 239622, 36" WIDTH, DIGGING BUCKET, .71 YD YD CAPACITY, 130LX MOUNTING, 65MM PINS, 255MM DIPPER WIDTH, SIDE CUTTERS

3 CuYd GP PIN ON BUCKET WITH BOCE FOR A JOHN DEERE 544, Fits On (machine Category): Wheeled Excavators, Connection: Pin On, Gets: Cutting Edge, Capacity: 3, Bucket: General Purpose

2013 KENT F35QT, F35 31134, SK260 INITIAL MOUNTING, 6000 FT. LBS IMPACT, 320-600 BPM, # 78253 Pin Diameter: 90MM Stick Width: 326MM

GEITH HD30-018, 206897, 18" WIDTH, DIGGING BUCKET, SK35 MOUNTING, 40MM PINS, 141MM DIPPER WIDTH, 4 TEETH

BLOWS PER MINUTE: 250-350 2014 KENT/FRD/FURUKAWA HYDRAULIC HAMMER, MODEL: FX475QTV, MOIL POINT, CARRIER RANGE: 39-61 (US TONS), OIL PRESSURE 2,320-2,610 PSI, REQUIRED OIL FLOW 53-79 GPM'S, IMPACT ENERGY CLASS: 8,500 FT.

HELAC POWER TILT COUPLER TT10-M63326-210 FOR A JOHN DEERE 595D, Coupler Mfr: HELAC, Fits On (machine Category): Wheeled Excavators, Drive: Hydraulic

NEW HOLLAND 716925016, 230434, 78" WIDE, 4X1 BUCKET GREAT CONDITION.

6.5YD HD G/P BUCKET FOR HYUNDAI HL780, GREAT CONDITION, NEEDS BOCE.

2017 LABOUNTY MHP200 HYDRAULIC CONCRETE PULVERIZER, 4,850 LBS, MIN EXCAVATOR SIZE OF 44,000LBS, CYCLE TIME AT MAX FLOW: 4 SECONDS, JAW OPENING 37 INCHES, JAW DEPTH OF 33 INCHES, REACH OF 7.5FT TO MOUNT TO EXCAVATOR THAT HAS THE FOLLOWING DIMENSIONS: 80MM...

GEITH HD50-042, 206947, 42" WIDTH, HD DIGGING BUCKET, 1.35 YD CAPACITY, R250LC MOUNTING, 90MM PINS, 400MM DIPPER WIDTH, SIDE CUTTERS, V33SYL TEETH PIN SIZE: 90MM, STICK WIDTH: 400MM

Werk-Brau 24" excavator bucket, .86 yd capacity Pin Diameter:: 90MM Stick Diameter: 382MM Fits Kobelco SK290-SK350 *Condition subject to change. Pictures are from when the bucket was received new.

MOIL BREAK BIT, 5.51" DIAMETER, FITS MODEL: F27 KENT/FRD

Recommended Carrier Weight: 10,000lbs.-19,800lbs Excavator & Loader Backhoe

GEITH HD50-042, 228300, 42" WIDTH, DIGGING BUCKET, SK260 MOUNTING, 90MM PINS, 327MM DIPPER WIDTH, SIDE CUTTERS, QTY 5, ESCO 158 X 330 TEETH

GEITH HD58-060, 206961, 60" WIDTH, DIGGING BUCKET, R320-R450 MOUNTING, 100MM PINS, 432MM DIPPER WIDTH, SIDE CUTTERS, 5, V43SY TEETH, # 29321

GEITH HD60-054, 93223, 54" WIDTH, HD DIGGING BUCKET, 2.51 YD CAPACITY, SK400-480, 460LX MOUNTING, 100MM PINS, 452MM DIPPER WIDTH, SIDE CUTTERS

2003 C&P P1000LM, 1182-82840-1, 10CU. YD CAPACITY, SNOW BUCKET, 90ZV MOUNT

2017 BRADCO RS24 ROCK SAW, 60" WHEEL DIAMETER, 24" MAXIMUM CUTTING DEPTH, 4" CUTTING WIDTH