Used Equipment Scrap Processing Demolition Equipment For Sale In Lowell

EQUIPPED WITH 6 FLARED X156 TEETH. NOT DRILLED FOR SIDE CUTTERS. 50MM FRONT PIN, 50 MM REAR PIN, 6.5" BETWEEN EARS, 11.5" CTR - CTR FRONT PIN HOLES, 16" CTR - CTR REAR PIN HOLES. 36" WIDE GENERAL PURPOSE DIGGING BUCKET.

MEASURES 13 7/8" BETWEEN THE EARS, 19" CTR - CTR, AND 80MM FRONT & REAR PINS. 32" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 3 FLARED TEETH & 2 STRAIGHT TEETH [1073550], 3 BOLT CAT-STYLE SIDE CUTTERS, CLEVIS EYE ON BACK AND DEAD PINS.

GOOD WORKING TAKE OFF. OPENED AND INSPECTED.

MEASUREMENTS ARE 10 3/4" BETWEEN THE EARS, 17" CTR - CTR, AND 70MM FRONT & REAR PINS. FRONT & REAR BUSHINGS ARE BROKEN. DOES NOT INCLUDE DEAD PINS. 38" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 FLARE TEETH [1U3302], SIDE CUTTERS, AND A HOOK ON BACK.

So many tire sizes. You are taking a chance(tires can be a mystery ,no one knows) that you might be buying junk. $400 minimum order. Farming and logging off road. Also 315,385,425 ,700 x22.5s.

2,600 gallon water tank(seperate)Makita gasoline motor, with pump 3" 265 gallons per minute, 700 gallons of fuel. We have pulled flat bed off truck. Water and fuel tanks and pumps on a flat bed only no truck.

CALL FOR MORE INFORMATION AND PRICING. HOME MADE HYDRAULIC THUMB. 45" GP BUCKET WITH 9'9" STICK.

REMAN HYDRAULIC PUMP $18,450.00 NEW

One owner since 2008. 29 foot rear deck over tandem. 11 foot pull out deck . 36" king pin setting. 65 foot totally stretched. Peter Kiewit and sons owned.

GVW 48,200LBS , 40,000lbs TDT capacity . SPRING SUSPENSION, PINTLE HITC , 24 FT TILT DECK.

Model: 200 BARRELL

Very low hours. Self Contained Hydraulics, Tandem Motors On Gear Box, 1000 RPM PTO, Bar Type Chain Conveyor - 33 1/2" Wide Pintle Chain, Conveyor Drive - 50:1 Worm Gear Drive w/2" Diameter Cross Shaft Spinner Drive - Right Angle Gear Cases - 1:5-1 Ratio...

ENGINE ARRANGEMENT# 4N7671 ENGINE IS OUT OF A CAT 637D S/N: 23W0638 MOTOR SCRAPER. CALL FOR MORE INFORMATION AND PRICING (219) 696-8911 WE WILL DO FINAL INSPECTION BEFORE DELIVERY REBUILT BY MCCALLISTER MACHINERY WASHINGTON, IN.

12" BETWEEN THE EARS, 17" CTR - CTR, 80MM FRONT & REAR PINS. 24" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 4 STRAIGHT TEETH [X290], 5 BOLT SIDE CUTTERS, OVAL CLEVIS EYE ON BACK, AND DEAD PINS.

Flatbed with 2) 500 gallon steel tanks.

48" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 6 TEETH [8J3352].

CALL FOR MORE INFORMATION AND PRICING. HOME MADE HYDRAULIC THUMB. 9'9" STICK WITH 45" GP BUCKET.

ROOD RUNNING TAKE OUT OF A CAT 637D S/N: 23W0638 CALL FOR MORE INFORMATION AND PRICING.(219) 696-8911

Like New !! Used 1 time !! 72" Wide Blade

Two way tailgate. AIR RIDE SUSPENSION, TAILGATE ..Nice liner.

CAB, HEAT, AC, MECHANICAL CONTROLS, HYD.

16' TRUCK MOUNT Bar Type Chain Conveyor - 33 1/2"W Pintle Chain Frame Rails & Floor - 3/16" Plate (ga) Front & Rear Ends - 10 ga Direct Mount Hydraulic Pump Tandem Gear Case 1 1/2" x 1 1/2" Angle On Interior & Exterior of Hopper Ends 30" Spinners D88k...

Pump Model: 200 BARREL 8)New virgin matched radials. DOT 407 ,42 foot, spring susp, alum tank, Garnet SeeLevel special 4 in.