Used Equipment Scrap Processing Demolition Equipment For Sale In Alconbury

Geith 5 finger grapple with 90mm pins quick hitch compatible . 90mm pins 490mm pin center 340mm ear to ear , Weight: 1500, Hours: 0

Used 5 finger manual grab to suit 26-35 ton excavator [nbsp] Pin dimensions: 90mm pin diameter 355mm ear to ear - dipper gap 480mm centre to centre [nbsp], Weight: 0, Hours: 0

New and Unused. Hydraulic rotating grab to suit 20-25 ton excavators pin size: 80mm ear to ear: 305mm centre to centre: 475mm

ROTATING SELECTOR GRAB TO FIT 13 TON EXCAVATOR. 70mm PINS , 260mm EAR TO EAR , 430mm PIN CENTERS

Hydraulic Hammer to suit 13 to 23 ton excavator. Tool diameter :4.49" Required flow : fl.oz./min3719-4734 Blows Minute : B/min 410500 Hammer operating pressure : Bar80 Energy class: joiule1650 , Weight: 1100, Hours: 0

BREAKER TO FIT 20-30 TON EXCAVATOR , 80MM PINS

Allied la-bounty K112MSD hydraulic fixed shear to fit zx300+ excavator

HYDRAULIC BREAKER WITH 80mm PINS TO SUIT 20- 28 TON EXCAVATORS

HYDRAULIC BREAKER WITH 80mm PINS TO SUIT 20- 28 TON EXCAVATORS.

Caterpillar G3108D hydraulic selector grab to suit 13ton excavator

KOMATSU PC-8 CAB SUTIBLE FOR ALL KOMATSU -8 EXCAVATORS THIS SHAPE.

ENGINE FROM A VOLVO A30 DUMPTRUCK. ENGINE DOES NOT RUN DUE TO BEING SEIZED BECAUSE HOLE IN THE SUMP AND RAN OUT OF OIL.

80MM PINS, 310MM EAR TO EAR ,440MM PIN CENTRES

Used Eurotec hydraulic fixed pulversier to suit 20-25 ton excavator. 770mm jaw opening pins sizes: 80mm Pin size 500mm centre to centre 350mm ear to ear (dipper width) [nbsp], Weight: 0, Hours: 0

Hydraulic rotating shear for 20 to 30 ton excavator which can be mounted direct onto boom or be picked up on dipper arm via quick hitch /direct pins.

Used Atlas Copco breaker to suit a 3-6 ton excavator.

BREAKER TO FIT 30-40 TON EXCAVATOR, FULLY RECONDITIONED

45mm pins 170mm ear to ear 180mm pin centres. , Weight: 0, Hours: 0 Hydraulic break to suit 2-4 ton excavator.

VOLVO A30 SKIP TO FIT A30 DUMPTRUCK

HYDRAULIC FIXED CONCRETE CRUSHER TO FIT CAT 325 OR SIMALAR

Bail grab to suit JCB TLT range, Weight: 0, Hours: 0

Used Allu screening bucket to suit a 12-16 ton excavator

Kingshoffer Hydraulic selector grab to suit 13 ton excavator Pin 65mm , Pin center 335mm Ear to Ear 255mm , Weight: 0, Hours: 0

HYDRAULIC BREAKER WITH 80mm PINS FOR 20T - 25T EXCAVATOR

CHOICE OF X2 HYDRAULIC BREAKERS WITH 80mm PINS TO SUIT 20- 28 TON EXCAVATORS

HYDRAULIC BREAKER TO SUIT 12- 18 TON EXCAVATORS. (CAT 312C PICTURED