Used Equipment Radiator Supply House Construction Parts For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Interior Panels, Covers, Vents: There are a few panels with this cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Operators Seat: No seat.

No cracks or repairs have been found.. Description: All of the pin holes on this boom appear to be in decent shape. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Weight: 6,200 lbs.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. All of the pin holes on this boom are in good condition and no cracks have...

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). Description: All of the pin holes on this stick are in good condtition.

There are no cracks or repairs present on this stick. Weight: 2100 lbs. All of the other pin holes look good. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters.

Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters.

No cracks have been found. Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long

Stick Information

LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. VINYL SEAT HAS A FEW TEARS IN IT. ALL WIPER ARMS MISSING. HAS A/C WHICH IS NOT WORKING. CONTROL LINKAGE HAS SOME WEAR.

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters.

Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear.

A debris guard was fabricated and is welded to the top of the blade. Angling Frame: The pin holes for where the angling frame is pinned to the machine have a small amount of wear. The debris guard is also broken away from the moldboard on both sides of...

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Weight: 1,800 lbs.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Description: All of the pin holes on this boom are in good shape and no cracks have been found. Weight: 1,500 lbs.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

No cracks or repairs have been found. Description: All of the pin holes on this boom appear to be in good shape. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long

(Outer bushing part number: 61EN-13320). Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. All of the pin holes appear to be in good shape.

It includes the following components: Boom-25 foot long boom section. Jib-section-13 1/2 foot long jib section. Boom to mid-section cylinder-The working condition of this cylinder is unknown.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

This stick has whats left of a thumb mount, welded to it. Weight: 1,600 lbs. There two cracks on this stick (see photos) near where the stick cylinder pins to it. Description: The working length of this stick is 9 feet, 7 1/2 inches.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long All of the pin holes look good and no cracks have been found. Description: The working length of this stick is 11 feet, 4 inches.

Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long Description: All of the pin holes appear to be in good shape and no cracks have been found. Weight: 4,500 lbs.