Used Equipment Precision Ag Equipment For Sale In Brookshire

Balderson Blade with Quick Connect for Wheel Loader 988 In good condition was used with a 988F wheel loader.

Fits Caterpillar 140H, 143H, 160H, 163H, 104G

Its ready to work. I can throw in piping that came with it. 2007 Troxell 130 BBL Kill Trailer / Vacuum Trailer, 2 compartment 40/90 split,Carboline Plasite 4300 brand new liner coat, hydrocholric acid resistant liner, 11R24.5, Fixed Axles,Painted aluminum...

1999 Galbreath Model: A5-OR-402 Roll Off Trailer, Tri-axle with big tires, 30,000lbs G.VW.R, 21,200lbs G.A.W.R., cable hoist roll off, 5th wheel. Works good, good rails. Spring suspension.

6 x 14.00 x 24 Tires Only @ 50% Remaining.

Both Blade and bucket for 988B

Original Cat Multi Shank Ripper Came Of A 140H Has 3 Cat Ripper And 8 Cat Scarifier Shanks, In Excellent Conditoin . Complete With Mounting Rods.

DOT relief valve. Very, very powerful Wittig HYDRAULIC vacuum pump. 2 Available: One has 18,000 miles and the other has 23,000 miles. 2002 Sterlings DOT CODE/ HAZMAT Vacuum trucks, Caterpillar 3126 engine with 300HP, Eaton Fuller 10 speed, 14,600lbs fronts...

All gauges and instrumentation is working. Will ship anywhere. 2011 Peterbilt 367 Tri-Axle Vacuum Truck with 238,000 miles. Sells DOT inspected. Cummins ISX15, 475HP, Eaton Fuller 18 speed, double frame, airleaf suspension, Crown 110BBL (4,620 gallons)...

2006 Mack CHN613 Vacuum Truck with 413,000 miles. Mack 427HP engine, eaton fuller 13 speed, NVE vacuum pump with transfer gear pump too, tandem axle, air ride, 3,500 gallon vacuum tank, 3.90 ratio, 230"in wheelbase, 12,000lbs fronts and 40,000lbs rears.

2001 Mack RD688S Bobtail Kill Truck/ pressure truck/ pump truck with 60BBL Vacuum tank, with 260,000 miles, Gardner Denver Tee Triplex pump at 10,000psi, bowie centrifugal pump, tandem axle, 20,000 fronts and 46,000 rears.

Aluminum tanks all around, fresh paint, 12 yard debris tank and 1,200 gallon of fresh water, boom extends 22ft. 2008 International 7600 Vactor HXX Hydroexcavator with a big blower, Hibon 8702, 29"HG, 5600 cfm, Caterpillar C13, Eaton Fuller 10 speed, full...

OVERALL LENGTH : 59'-8" MAIN DECK LENGTH : 45' UPPER DECK LENGTH : 14'-6" WIDTH : 102" SWING CLEARANCE : 102" - 120" KING PIN SETTING : 16" - 34" DECK HEIGHT : 40" - 41" Good trailer, ready to work.

Real nice looking and maintained truck. G&H 60,000lbs roll off cable hoist. No cylinder leaks, no hydraulic leaks or any oil leaks for that matter. Truck sells DOT inspected, fresh tires all around, no check lights, all gauges in the cab working, all...

Beautiful monster 2006 Mack Granite CV713 Gin Pole Winch Truck with 123,000 miles!!! Mack AMI 12.0L engine, 338" Wheelbase, 29" poles, 34" bed, 3 winches: Rufnek 130,000lbs, Rufnek 80,000lbs and Rufnek 20,000lbs.

3 AVAILABLE: 2006 Sterling Supersucker Air Mover. Blower hours are 3,002 hours. Truck sells ready to work, it has gone through the shop by us. Tandem axle, full tank tilt and full open hydraulic rear gate.

Buyer pays shipping. Chrome exhaust, aluminum tanks, aluminum wheels, chrome front bumper and grille, interior is nice, no broken switches or dash. Can sell the trucks alone or as a combo package with a very very nice 2007 Troxell 130 BBL Kill Trailer,...

Blower hours are 3,002 hours. The dash on interior is very good, no broken pieces on dash or cracks. Brand new roof upholstery, new upholstered seats, brand new floor mat all around, tank level indicator is new, tank float valve is brand new, and shutoff...

No check lights, no issues. All fully working. Powerful Hibon blower 5,600 CFM and 29" HG. FINANCING AVAILABLE AT LOW RATES 6 Ramvac Hydrovacs available on Kenworth chasis. Has a 12 cubic yard debris body, 4,000psi quintuplex pump all in a heated...

Will carry hazardous material and anything. With 14,000 original miles (computer verified) and 8,000 hours. This truck has been fully refurbished and is ready to work. No check lights, no air leaks, no nothing.

MADE IN USA NEW / UNUSED SCARIFIER NEW UN TO FIT 140M, 12M, 160M . COMES EQUIPPED WITH 5 SHANKS IN STOCK READY FOR DELIVERY.

Good Tires All Around, Has A Blower

Beautiful 2013 Kenworth T800 Winch Truck ready to get the job done. Chalmers suspension. It has full rolling tailboard, hydraulic Tulsa 45,000lbs winch and a hydraulic NVE 367 Challenger vacuum pump, 14,000lbs fronts and 40,000lbs rears.

Air ride, 16,000lbs fronts and 40,000lbs rears. 2007 Mack CH613 Winch Truck with a vacuum pump, ready to work. 353,000 miles, Maxitorque 13 speed transmission, Tulsa 45,000lbs hydraulic winch and has 2016 Jurop PN84 vacuum pump, leather seats, chrome...