Used Equipment Poultry Litter Equipment For Sale In Las Vegas

2000 john deere 7210 tractor, mfwd, creeper, cab, a/c, powrquad 16 speed, 5,085 hours, 95 hp, $35,000 2000 john deere 7210 tractor, mfwd, creeper, cab, a/c, powrquad 16 speed, 5,085 hours, front tires 13.6-28, rear tires 18.4-34, serial # rw7210c035988,...

Runs Smooth, great body condition, has air conditioning 1999 Ford Box Truck. Listed as vechile body type TCC. Title #3FENF80Z2XMA21920. 1999 Ford Box Truck with liftgate. Has tailgate and air conditioning.

Will include several ratchet tie downs. It's in good cosmetic condition with a bump here and a bruise and scrape there but nothing that would be out of the ordinary. Air conditioning blows ice cold too! This truck would make a great moving truck or start...

There is not a belt included in this sale. Up for sale is a FAST-WAY Batch Plant Hopper 8 Ft x 8 Ft Feeder for Fastway Concrete Plant. This is for the hopper with stands and a Cardinal dial scale.

Weighs in at 18500 lbs. Please take a good look at the pictures and call with any questions. Tires are all in good running shape. It has a 92 inch wide bucket for a 1.75 yd capacity.

Powered by a gasoline engine and completely portable. Up for sale is a 2008 FAST_WAY 6 inch Portable Auger Cement Bag Hopper. Need to need cement into your mix? Set up this portable auger over your batching bin and break your bags into it.

Pneumatic tires. Please take a good look at the pictures and call with any questions. Weighs 25000 lbs. Power shift transmission. Vibratory compactor. Powered by a Detroit 3 cylinder diesel engine.

We have a selection of these. Call with any questions. Should fit the commander III series curb machines but please verify by the tape measurements pulled in the pictures. This is a tall standing curb.

Can have an 18-24 inch mill head hydraulic powered. Up for sale is a RAYGO 100 Barco Milling Machine Concrete Grinder Trimmer Barcomill. Powered by a Duetz diesel engine. Solid rubber tires.

Up for sale is a 1983 GOMACO GT6200 Crawler Curb Machine. Does not include any sensors. Please take a good look at the pictures and call with any questions. 6 inch feed conveyor. 2 tack hydrostatic drive and a 20 inch x 6 ft.

Powered by a Hatz 2 cylinder diesel. Allen 702-423-2001 or Byron 702-467-5574 Please take a good look at the pictures and call with any questions. This machine follows after a trencher and compacts the trench after it is back filled.

Raygo Rumble Vibratory Padfoot Tow Behind Compactor. Diesel powered vibratory compactor.It is 60 inches wide. Please take a good look at the pictures and call with any questions. Tow behind your machine and get grading and compaction done at the same...

It is 33 inch wide at the drums. Up for sale is a 2009 Rammax RX1510 Viper Walk- Behind Trench Compactor. Wired remote control. Has a 3 cylinder 18 hp Lombardini diesel engine. Please take a good look at the pictures and call with any questions.

/ 180" SPADE NOSE BUCKET, CUMMINS QST30 ENGINE, 90% (FRONTS) AND 50% (REARS) L5 TIRE TREAD REMAINING, HORSEPOWER: 720 EROP, A/C, RIDE CONTROL, AUTO SHIFT, JRB 12.8 CYD.

Made by Paladin. Please take a good look at the pictures and call with any questions. The dimensions are 21.5 inches between the ears, upper pin 2.5 inches, lower pin 2 inches, 20 inches pin center to pin center top to bottom.

Curb is 26 inches wide and stands 9 inches tall and is 7 inches thick at the thickest curb portion. Allen 702-423-2001 or Byron 702-467-5574 Please take a good look the pictures and call with any questions.

Price is for the boom only. Up for sale is a Cat 330 C -D Excavator Boom Excavator Long Reach Attachment. This is a replacement boom for giving you machine extra reach. Fits both the Cat 330C and Cat 330D.

Is a drive over approach curb. Up for sale is a Gomaco GT3600 Curb Gutter Machine Form 32. Opening is 31 x 23.25 inch opening. Curb is 36 inches wide and stands 9 inches tall and is 9 inches thick at the thickest curb portion.

Space between the ears is 17 inches pins are 3 inch approx. Up for sale is a Cat EL300B Excavator Bucket. Will fit other Cat machine. Dimensions are 30 inches wide. And 22 inches center to center.

72" Sweeper Bucket

66' with JIB 2WD diesel

CANOPY, 66" SINGLE DRUM SMOOTH, CUMMINS QSB3.3 99HP TIER 3 DIESEL ENGINE, TWO SPEED HYDROSTATIC DRIVE, LIGHTING, 14.9-24 TIRES

MACHINE IN OPERATING CONDITION. EROP, A/C, 5.2 CYD / 130" GP BUCKET, 26.5-25 TIRES WITH ABOUT 50% TREAD REMAINING.

Good for Cat excavators 336E 336F 330C 330D. Allen 702-423-2001 or Byron 702-467-5574 Please call with any questions. They are Cat part number 6Y5685. Up for sale is a Caterpillar OEM Excavator Sprocket Rim Replacement Pair on pallet ready to ship.

We have a selection of these. Call with any questions. Should fit the commander III series curb machines but please verify by the tape measurements pulled in the pictures. This is a tall standing curb.

Back of curb is notched. Up for sale is a Gomaco GT3600 Curb Machine Form 35. Opening is 31.5 x 23.25 inch opening. Curb is 12 inches wide and stands 12 inches tall and is 6 inches thick at the thickest curb portion.

Up for sale is a Caterpillar Front Ripper 48 In. Motor Grader Scarifier 4 Shank. Loosen up the material in front of you grader with this scarifier attachment. Can hold up to 9 shank rippers.