Used Equipment Other Equipment For Sale In Tulsa

IT was used for 2 years and has been garage kept since. It is in very good condition. This is a pecan picker with a gas motor. This is a pull behind picker. It can be pulled with a small tractor, lawn mower, atv, etc.

The ranchand panels are on sale for $35.00 each -unpainted- 5' x 10' 5-rail. These are nice panels made with 1 5/8\\" legs and 1\\" rails all 14 gauge material. These panels are designed with 2 3/8\\" legs so you can pull the post cap and drive a t-post...

Recently overhauled. A canopy is also included. Ford Jubilee Tractor with many implements included. Starts first time and runs very strong. 3 point implements included are a brush hog, box blade, grader blade and a dirt bucket.

D6D Welder Tractor w/(4) DC-400 welders, compressor and lead boom Quincy 390 compressor, A/C outlets Tack Rig

Tank under fuel tank for operator comfort. M30-2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, High volume hyd pump for speed. Fully serviced and ready for work.

561C Hydraulic Pipelayer S/N 62A00335, 40,000 lbs Capacity, Recent Conversion, Hydraulic counterweights, New Seat and Operator Compartment, Hydraulic Boom Kick-Out, 20" Pads

Cat D8K with Challenger CP583K Hydraulic Pipelayer, 20' boom, 28" pads Tail winch, Complete service, New radiator.

Reconfigured March 2010. CAT D7G Welder Tractor w/4 - Lincoln DC-400 welders Caterpillar D7G WELDER TRACTOR equipped with (4) Lincoln DC-400 Welders, Quincy 390 Compressor, Lead boom and outlets.

D7G Equipped with NEW (2009) Challenger Services Pipelayer Attachment, Standard 24' Boom, 30" Pads, M30 2 speed planetary load line winch with free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat.

Counterweights Caterpillar 561 Pipelayer, S/N 62A00096 Recent Hydraulic Conversion, 2-speed load winch 20 Foot Boom, 18" Pads, Hydraulic Counterweights. Cat 561C Pipelayer 62A00096, Hydraulic Conversion, 2 speed load winch, Hyd.

Challenger Tack Rig CAT D6D Welder Tractor w/ (4) LINCOLN DC-400 welders, Quincy 390 Compressor, Lead boom and A/C outlets.

Challenger CP561N Hydraulic Pipelayer Attachment on D5N LGP, 40,000 lbs.

Cwt Caterpillar 561D Pipelayer S/N 54X00513 Two speed load winch,20 foot boom, 18" pads Hydraulic counterweights 561D Hydraluic Pipelayer, Two speed load winch, 20' boom, 18" pads, hyd.

Pipelayer (2009) 24' Boom, 30" pads, MOUNTED on Cat D7G LGP S/N 72W00540 Challenger CP572G Hydraulic Pipelayer (NEW pipelayer-on D7G LGP), 90,000 lb.capacity, 30" pads Challenger CP572G Hydraulic Pipelayer equipped with CP572G LGP, 90,000 lbs lift capacity,...

Pipelayer Attachment, Standard 24' Boom 30" Pads, M30 2spd planetary load line winch w/free fall, M30 single speed planetary boom winch, Hi volume hyd pump, cwt interchange w/Cat, Hyd boom stop.

D6N XL COMBO Hydraulic Pipelayer D6N XL Hydraulic Pipelayer S/N AKM00602 Tractor: 2004 Model / Attachment: 2007 Model, 25 Ton Capacity, 6 Way Blade, Hours: 3636, 24" Pads

1-Newage 100kW105 degree rise Alternator producing 125kVA@1800 rpm/60hz/230/460 volts. Cat D6D Welder Tractor w/new welder package installed (Feb 2008) 4-Lincoln V-300 inverter welding machine for automatic or manual welding.

Pads, 20' boom, 20 ton capacity 1999 Model with 3645 hrs 110 hp Hydraulic winches Free fall on load winch 20" pads 20' boom Caterpillar 561M Challenger Pipelayer equipped with hydraulic counterweights, 20?

Cat D6E Welder Tractor - Pipeline Welder Package w/100% UC, 5-Lincoln XMT-350 inverter welders for automatic or manual welding 4-Set shock mounts for each welder 1-Newage 100kWl05 degree rise,Alternator producing 125KVA @ 1800 rpm/60hz/230/460 volts.

561N Hydraulic Pipelayer S/N TAD00135, 2008 Model, 20 Ton Capacity, Hours: 500, 30" Pads, Hydraulic Counterweights

CAT 561N Hydraulic Pipelayer S/N TAD00139, 2008 Model, 20 Ton Capacity, Hours: 345, 30" Pads Hydraulic counterweights

An excellent attachment for loading and unloading pipe on the pipeline right of way. Challenger stick extension, 2 piece for 15 ft reach and 3 piece for 20 ft reach, attaches to most excavators with bushings and spacers.

Came off D6T LGP s/n KJL00988 Winch Located at Tusla OK.

ESCO 36" wide Bucket, with side cutters, 5 teeth, lifting eye, Has pins, fits Volvo EC140 Excavator.

Hammer and leads currently in Tulsa Oklahoma Leads are 8"x27" u style leads and are like new. There is 40' top, 40' mid, 20' mid and new 20' stab section for total length of 120'. Hammer and leads are like new.

623F SCRAPER FLOOR, REBUILT, LIKE NEW.