Used Equipment Oil Field Trailers For Sale In Bates City

2006 Loadcraft Loadcraft 60' 60 Ton Quad Axle, Air Ride Suspension, Tail Roll, 44' Long x 94" Wide Deck, Air-Ride Suspension, Air Brakes, 255/70R22.5 Tires, 146,000 lb. GVWR, 60' Overall Length

2006 Loadcraft Loadcraft 60'

2006 EAGER BEAVER 60GLB 60 Ton Capacity, Quad Axle, 5th Pin on Axle, Air Ride Suspension, Air Lift 1st & 4th Axle, 143,700 lb. GVWR, 275/70R 22.5 Tires

2012 TRAIL-EZE TE120-0F59 OIL FIELD DETACHABLE GOOSENECK TRAILER 59' 6", MAIN DECK: 45', UPPER DECK: 14' 6", AXLES: (4) 25,000 lb. W/ AIR LIFT ON 1st & 4th, EQUIPPED WITH 147940# GVWR DETACHABLE NECK, POP-UP DECK ROLLERS, 102" ROLLING TAILBOARD, 2 KING...

2002 Kalyn, Narrow Neck 3 Axle Oilfield lowboy, air ride suspension with dump valve, 40" deck, neck roller, and tail roller, older 255/70R22.5 rubber on hub pilot steel wheels, 10 D rings, 4 pipe stake holders, new king pin, HD neck pick up, (Kaylen is...

10' TOP 43' Lower With Beavertail 36" Deck Height JULY DEL

61" Axle Space 5 Lights Per Side Very Sharp IN STOCK

CPS Belly Dump, Rear Liftable 10'7" Spread from Frt. Axle to Rear Axle Center, Low Profile 3-Axle, Alum Wheels, Lift Axle, Lightweight #15,200

23.5 CU YDS., Lightweight #14,900 +/- 3%, White Paint,

Pneumatic Sand Spec Tow Plate Work Lights Tool Box Steel Piping Extended Handles Hose Tubes Very Sharp

OAL 3 Axle 2 Lift Axles Super Singles, Tire Inflation 6" Product Valves

Cement Spec Hose Tube Ext. Handles Top Air Discharge to Rear Lightweight & Sharp

2007 Kenworth C500B 2 Spd. Transmission, 21' 8' 6" Bed, Tail Roll, No Gin Poles, Braden W150RRA Winch, Braden MS3020B Winch, 3rd Winch Mounted Under Bed on Right Front

2007 Kenworth T8000B Cummins ISX530, 18 spd, 2 spd Aux. Tranmission, Walking Beam Suspension, 374" WB, 32k Fronts, FR2P32S Planetaries (Rears - 68k lbs), 22' x 9' Bed, Gin Poles, Tail Roll, Braden W150 Winch, Braden MS3020B Winch, 183K miles

Cummins 6 cyl, A/T, Tuff Trac susp, 18000 lb frt, VBT4618 rears, 210 in. WB, Leach 31 cy packer

02 Mack "Elite" CL713, Mack E-427 engine, 9 speed w/ 4 speed aux. Trans., 20K front axle, 44K rear axle, on camel back suspension, 20K Pusher axle, Double Frame, 300" WB., Flotation tires front with Polished alum wheels, 24.5 tires rear with steel wheels...

2001 Peterbilt 357, W/ Split Drum Wireline Body, Grease Pump, Measuring Head, Onan Gen, ISM Cummins W/ Jakes, 10 Spd, Air Brakes, A/C, Cruise, Heated Mirrors, Air Ride Susp, 22.5 Steel Wheels Front & Rear, 80% Rubber, 54,600 GVW, White in Color, Odom...

2009 kenworth w900 kill truck

Trust is a beast!!! 1982 Autocar Bed / Pole Truck, Has pole troughs but no poles, Cummins 400 BC3, Jake Brake, 9 Speed Trans., 4 Speed aux. Job Done on this Truck, I Can deliver to the Port of Houston, Canadian Port of Entry or points in between.

Walking beam susp, 46k rears, 16k front, 12k steerable drop, double locking rears, air sliding fifth wheel, 80% rear tires, 95% steers, 25,000 LBS winch, 6NZ Cat

A/C Condition: Good, A/C, Differential Lock, State DOT, 6x4, Turbo, Wet Kit

Bed and roller this truck is one "Hell for stout 30 ton truck" , with a good bath and paint job it would be a pride to own and work, and work for a long time too. Mack with Galvanized cab, lots of custom aluminum extras power steering, A/C, dual air ride...

EM6-300 Mack engine 300 HP., new Mack reman. Engine some time in 1987 or 88

FRONT AXLE & 64,800 LB REAR SUSPENSION. Model Year: 1998 Make: Volvo Model: ACL Engine Type: L6, 10.8L (661 CID) Cab Type: Conventional Cab Drive Line Type: 6x4 GVWR Class: Class 8: 33,001 lb And Over Transmission: Fuller Transmission/Rockwell Rear Axle...

6x4, Headache Rack, Turbo, Wet Kit

8 inch full tail roller. 45,000 pound mechanical Braden winch. From back of cab to end of frame with 13ft.