Used Equipment New Holland Rakes For Sale In Greentown

New Holland TR98 that is very clean! Key Features - Completely rebuilt guts - 4,500 hours - Mud Hog RWA - Lateral tilt - Dual chaff spreader - Two speed rotor gear box - Burvee hydro bubble up

Used 2008 New Holland CR9060 combine with 1985 eng / 1520 sep hours, 2wd, Goodyear 620/70R42 front duals (75%), Goodyear 600/65R28 rear tires (75%) Drive Tire % Remaining: 75, Duals, Fuel Type: Diesel, Steering Tire % Remaining: 75, Weight: 35,150

Used 2006 New Holland CR9070 combine with 2568 engine, 1892 threshing hours, front duals

Key Features - DSP rock trap - 650/70 R38 Duals - 750/6SR26 Rear - In-cab electric fold over full ABR - Autoguidance Nav II controller - Yield and moisture sensors - Leather operator seat

PRICE REDUCED! Used 2014 New Holland 800CF-40 40ft draper head, split reel

Used 2012 New Holland BB9080 baler with just under 15,000 bales on it, very clean baler.

If you harvest in uneven terrain, the 740CF Direct-Cut SuperFlex auger head is the natural choice. New 2011 New Holland 740CF SuperFlex grain head. This was a demo unit but has never been sold to a customer and will come with standard factory warranty.

Used 2012 New Holland T8.330 tractor with 991 hours, guidance ready, 19 speed (50kph) power shift transmission (19F / 4R), 30mph max travel speed, 4 remotes, standard pump, 540/1000 PTO, luxury cab, 360 HID lights.

2017 New Holland BC5070 Square Baler 14x18 bales adjustable bale length 12-52 inches 6 tine bars 156 tine bars 93 SPM 8 twine ball, 4 wire coil flywheel weight 248 lbs minimum tractor hp 75 weight with twine 3,715 lbs, weight with wire 3,851 lbs Bale...

A Few Key Features: -Clean and Efficient Power - The F5G engine uses ECOBlue Compact Hi-eSCR (Select Catalytic Reduction) with light CEGR (Cooled Exhaust Gas Recirculation) to meet Tier 4B emission compliance and reduce your fuel bills.

2014 New Holland T4.105 With Front End Loader with 460.8 hours Excelent Condition always kept inside very well maintained, clean ready to use tractor Weight:6768 to 7936 pounds 105 engine hp 1-3 hydraulic valves 12.5 gpm pump flow 540/1000 pto MSL Height...

2016 New Holland H7220 Disc Mower 540 rpm PTO, enclosed gears and four HB belt weight, 3,690lbs Operating MPH 0-9 Transportation MPH 20 65 Hp required Cutting width 9.2 Rubber rolls Height: 48, Length: 90, Weight: 3,690

2017 New Holland Boomer 24 24 hp 3 cylinder engine 6 gal fuel tank 18.5 pto hp, max forward speed 11 mph 3 point hitch lift capacity 1450 lbs lift capacity on front end loader 700 lbs max lift capacity 1100 lbs operating weight 1830 lbs Cab, 2 Post Canopy,...

2017 New Holland BigBaler 340 Plus BigBaler 340 122 PTO hp Bale Width 47.3” Bale Height 35.4” Max Bale Length 108” Consistently best-in-class bale quality with up to 10 percent more density Smart baling with best-in-class features raises capacity and...

Very clean baler. Used 2014 New Holland Big Baler 340S with approximately 3,000 bales on it.

Equipment Specs - Dual, independent grapples - 6” tine spacing - Standard cylinder guards to protect all cylinder components - 1-1/4” cylinder pivot pins - 1-1/4” x 24” grapple pins greatly reduce torsional force - 1/2” end plates - Cushioned and...

Key Features -Skid Steer mount - 50" wide carriage - Removable guard for walk-thru application - Heavy-duty bolt on side steps - Heavy-duty pull ring for support chain - Class II locking forks

Key Features -Heat treated tines, manually adjustable - Locking position pins - High visibility back guard - Steps for easy entry to cab - ROPS frame Attachment Specs - 48” length - 1.4” x 4” cross section - 5500 lbs rated at 24” Works on the following...

Key Features -Skid Steer mount - 50" wide carriage - Removable guard for walk-thru application - Heavy-duty bolt on side steps - Heavy-duty pull ring for support chain - Class II locking forks

Bucket is sold separately stock #MI16078 New Holland 47577407 mechanical quick coupler for New Holland mini excavators.

Key Features -Skid Steer mount - 50" wide carriage - Removable guard for walk-thru application - Heavy-duty bolt on side steps - Heavy-duty pull ring for support chain - Class II locking forks

3 Pt. 60" Notched 16 Blade Disc

58” tiller, slip clutch, rear tine.

Equipment Specs - Dual, independent grapples - 6” tine spacing - Standard cylinder guards to protect all cylinder components - 1-1/4” cylinder pivot pins - 1-1/4” x 24” grapple pins greatly reduce torsional force - 1/2” thick end plates - Cushioned...

Equipment Specs - Category 1, 3-point hitch mount - Suitable for tractors with 15 – 50 PTO horsepower - 24 carbide steel teeth on 20-inch diameter wheel - Bi-directional cutting for increased productivity - 16-inch above ground clearance - 16-inch cutting...

Equipment Specs - Dual, independent grapples - 6” tine spacing - Standard cylinder guards to protect all cylinder components - 1-1/4” cylinder pivot pins - 1-1/4” x 24” grapple pins greatly reduce torsional force - 1/2” thick end plates - Cushioned...

Equipment Specs - Dual, independent grapples - 6” tine spacing - Standard cylinder guards to protect all cylinder components - 1-1/4” cylinder pivot pins - 1-1/4” x 24” grapple pins greatly reduce torsional force - 1/2” thick end plates - Cushioned...