Stretcher grabs the wire and you hold pressure with your side, leg, etc, leaving your hands free to staple wire to post. Simple design means no breakdown problems yet effectively tighten wire by putting pressure against the post.
Use in remote areas. No back-breaking wiggling or pulling. Removes steel T-Post without the aid of chains, jacks or motorized assistance. The simple design is built to last.
Forged fence tool is heavy duty, with vinyl grip. Suitable for many jobs, including stretching and twisting wires, as a hammer, nail puller, spade, and as a wire cutting plier.
Bolt stretcher together to grip fence. Chains/come alongs are not included. Chain is attached to stretcher and used in conjunction with come along to pull fence tight to eliminate fence bulge.
Ideal for all perimeter fences. Class 3 galvanized, 180 KSI wire. The standard for both electric and non-electric fences. Can be hand-knotted or crimped.
Easily slips over T-post, no tools required. Contents: Contents of this package will build 4 light duty end braces, or 2 light duty corner braces, or, 2 heavy duty end braces or 1 heavy duty corner brace.
Front pulls staples, lifts tugs, and splices wire. Starting and pulling point on one jaw with corrugated hammer head on the other. For wood and steel posts. Wire stretcher located behind the joint.
Fits standard pipe fence from 1-5/8" to 1-7/8". The clamp fastens together with a carriage bolt and nut, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping.
1) Pull the fence wire together so that the ends are not more than 1/16” apart. Twist the splice until it snaps securely, holding the wire ends together. 5) Roll your thumbs over the ends to make sure that all ends of the splice are snapped securely...
Mend new and old fence wire in a fraction of the normal time. Can be maintained year after year by re-tightening as needed. Use on any kind of wire: New or old, barbed wire, smooth wire, hi-tensile, woven wire, etc.
Fits standard pipe fence from 1-5/8" to 1-7/8". The clamp fastens together with two carriage bolts and nuts, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping.
Works like riding on air! The clamp is a pre-formed piece for a 2" round pipe. The 8" tall sturdy metal hub wheel comes with shims for use on gates with less than 1 7/8" O.D. pipe.
Splices stay tight even with temperature changes. Crimp 'N Cut Spice-It Tool sold separately. Holds tight using only one splice per joint. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool.
Ideal for electric fence repair or construction. Large designed for 4-8" posts. Cuts installation time in half and eliminates need for terminal insulator. Easy to install and stays in place.