Used Equipment Manure Handling And Applicators For Sale In Three Lakes

2510L APPLICATOR, 2400 GALLON, 25 COULTERS ON 30", COULTERS 19" OUT OF 20" NEW, 380/90R54 DUALS, 3 SECTION VALVES WITH REDBALLS, HAS JD RATE CONTROLLER, CAN BE RUN WITH JD 2630 DISPLAY INJECTION NOZZLES

120' UPDATED BOOM, 15" SPACING, 9 SECTION, HYD TREAD ADJUST, 1200 GALLON SS TANK, FIRESTONE 380X50 TIRES, 70% ALL AROUND, ALL WHEEL STEER, SEVERE DUTY SUSPENSION, FRONT FILL, AIR PURGE, PREMIUM CAB, PREMIUM LIGHTS, REMOTE GREASE LEG, NORAC 5 SECTION BOOM...

Axle Type: Tandem, Nozzle Spacing: 20, Tires or Tracks: Tires Nozzle spacing. Overall good working condition. 60' x-fold boom. Ag-Chem 750 750 Gallon tank.

120' BOOM, 340HP, 1200 GAL SS TANK, 380/105R50 TIRES 40%, SS 20" SPACING, HYD TREAD ADJUST, HI FLOW PUMP, LOAD COMMAND, 5 SECTION BOOMTRAC PRO, R&L FENCE NOZZLES, WHEEL SLIP CONTROL, DELUXE CAB, XENON LIGHTING, GS3 2630 DISPLAY LESS ACTIVATIONS, AUTOTRAC...

NEW LEADER G4 SS 300 CU FT DRY BOX, SINGLE BIN, HYD TREAD ADJ, FIRESTONE 380/90R46 70%, JOHN DEERE RATE CONTROLLER Boom Width: Dry Box Hydraulic Tread Adjust: Yes Rogator 1254, New Leader G4 SS box-single bin, Firestone 380/90R46 (70%) Titan 24.5R32 Floatation...

MELROE SPRA-COUPE 220 GAL, POLY TANK, 60' BOOMS, 20" SPACING, HYD FOLD & HYD HEIGHT ADJUST, FOAM MARKER, TOW HITCH AND TONGUE, EXTRA SET OF TIRES., Boom Width: 60-Foot, Boom Leveling: No, Nozzle Spacing: 20 in, 220 GALLON POLY TANK 60' HYD FOLD & HYD...

NEW LEADER G4 SS 300 CU FT DRY BOX, SINGLE BIN, HYD TREAD ADJ, FIRESTONE 380/90R46 70%, JOHN DEERE RATE CONTROLLER

WHEEL V RAKE,CENTER KICKER WHEEL

TANDEM AXLE,PRE CUTTER,ROLLER CHUTE, TANDEM AXLE PRE CUTTER ROLLER CHUTE, NumBales: Bale Count Number of Bales: 0

Hydraulic fold. Sitrex ST780H 25'7". 50 HP Tractor requirement. 6 Rotor tedder.

36', TIRES 25%, RACHET STRAP HOLD DOWNS, GOOD TONGUE, PAINT AVERAGE

TX GATOR, 15HP, 4X2, MANUAL DUMP, GOOD PLASTIC, SEATS ARE DIRTY BUT NOT TORN, TIRES 75%, FRONT BUMPER, RUNS AND DRIVES GOOD

2008 New Holland H7460

15' FLAIL SHREDDER, 1-3/8" 1000 RPM PTO WITH OVERRUNNING CLUTCH, HEAT TREATED KNIVES (READY TO BE TURNED), LIFT CYL WITH HOSES, (4) 7.60X15 RIBBED TIRES, lift cylinder w/hoses (4) 7.60x15 ribbed tires Drawn with 1000RPM, 1-3/8 inch driveline & overrunning...