Used Equipment Log Trailers For Sale In Connecticut

With horsepower options ranging from 860 to 990, a huge 49-inch diameter grinding drum mounted on an 8½ -inch shaft and an aggressive feed system, the Boss Hog is capable of continuous product output in excess of 400 yards per hour, depending on the...

It can cut and chip up to 10 inches intermitantly. The TimberAx has the ability to cut and chip material as large as six inches in diamiter on the move. Skidsteer mounted brush and tree shredder.

With only 1,960 hours of service and 990 horsepower, a huge 49-inch diameter grinding drum mounted on an 8½ -inch shaft and an aggressive feed system, the Boss Hog is capable of continuous product output in excess of 400 yards per hour, depending on...

Mounted on a 1981 GMC 5000 with 350 motor 18500GVW 12 foot Flatbed Dump. The GMC has new brakes, new starter, new timing chain and water pump, leaf springs, and more. 2 785 guns , 2 feeding needles, and 2 JD9 Guns.

1996 Custom 20 Ton tilt bed tag trailer model 201TT24, YB491866T1B1T983, new paint and lumber, excellent tires and brakes, you won't find a better one

2009 Manac Hi-Boy trailer with sliding axles, air suspension, good condition

Millenium 12 Ton Tag Tr;ailer with 21' Deck. Call 860.370.9993

Steel Flat Floor, Working Unit

2011 Ledwell LW51, 51' hydraulic tail trailer with kicker and winch, new brakes and tires, clean DOT ready to work, deliver available 860-836-0692 Jesse

Call Nageeb Saleh 860-847-0115 Kaufman Tilt Trailer, 14000 GVRW, 22' Total Length, 14' Tilt Section, 8' Stationary Deck Section, Excellent Condition.

1999 50TON TALBERT BEAM TRAILER

HUDSON 10 TON TAG TRAILER WITH ELELCTRIC BRAKES, 18 FT BED, 5 FT BEAVERTAIL AND 5 FT RAMPS, GOOD LUMBER, CALL NICK AT 860-861-1326

Contact Jim Gagain 860-836-7796. No Cracks or Welds, No Major Rust or Rot, Road Worthy when parked.

Contact Jim Gagain 860-836-7796. No cracks or welds, No major rot or rust, Road Worthy when parked.

1999 POLE TRAILER READY TO GO

Air ride suspension, 8'6" grame and rear frame width including tires. "Gentle Riser" feature with wood installed between splice beams. 25' clear platform deck length with 2" decking premium for heavier mainbeams Model: TL106

1986 Witco Challenger RG 50 ton lowbed, been off the road for 5 years, needs new deck, but in reasonable shape and everything works.

Liddell 50 Ton Tri/A Drop-Side Trailer w/ Non Ground Bearing Gooseneck, Bracket for 4th Flip Axle 26’ Working Deck, 14’ Rear Deck w/ Stick Well, Air Ride, Air Lift 3rd

Rogers 40 Ton T/A Lowboy w/ RGN, 8' x 21' Deck, RECONDITIONED Model: 40 TON

Gooseneck Non-Bearing, 26" Beam Insert w/ (2) Fixed Axles, (2) Flip Axles, 26" Drop Side Insert w/ (2) Fixed Axles, (2) Flip Axles, Stinger Insert, One Owner Talbert 60 Ton Combo Lowboy Trailer w/ Hyd.

7 Ton T/A Tag Trailer w/ 7' x 16 Deck, 2' Beaver Tail, 5' Ramps, Pintal Hook

20" High Deck, 275/70Rx 22.5 Tires. Can take a 4th axle. DOT inspected and ready to work. Four bean 50 Ton A/R Trailer.

Used Eager Beaver 20XPT Trailer, Attachments: Pintle Hitch, Powertrain: Air Brakes; Dual Axles; Spring Suspension

455/55R22.5 (L) TIRES. SOME OF THE FLOOR BOARDS ARE POPPING UP. OVERALL PRETTY SOLID TRAILER. ALL AXLES 22,000 LBS. 125 CUBIC YARDS.