Used Equipment Loader Attachments For Sale In Ottawa Lake

Cab/Air, Deutz TCD 2.9 L4, 74-hp, High Flow 18GPM and 33GPM, 19 MPH, Universal Quick Attach, Quick Connect Hydraulic Connectors, 14-pin Wiring Harness Control Multiple Attachment Functions Simply From Single Joystick, 7,072 Lb. Tip Load.

Good Used Coupler Removed from a Unit that had a Cab Fire. No Control included.

24" HD Trenching Bucket w 65MM Pins and # 290 Teeth

13 ft 1 in Rebuilt as new arm Part number 7040868 has all holes line bored to spec. Welds checked and new bushings and seals installed.

49" Fork Frame, 4" X 1.8" X 48" Long Tines

JLG 48" Forks, 21/4 Diameter Eyelet, 24 1/4" Center to Ground, 2 3/8" Thick, 5" Wie, 48" Long

4 Yard Bucket for 644 or 644A, 102" Wide 52" tall 36" Deep, EDGE is bad

84" Bucket 450 B&C Crawler Loader

FITS WACKER NEUSON WL60, 56" Wide Carriage FORKS ARE 4 X 2 X 60

30" Bucket to Fit Cat 320B 17-1/2" Pin Centers, 80MM Pins, Ears are 12-1/4" Between, Bucket also has Lift Hook

RARE 12.5-20 MPT TIRES Price is for the PAIR. Sidewall Has Been Professionally Repaired

RAIL CAR COUPLER, Removed from Wheel Loader

80MM Pins, 40" WIDE 1.05 YD Fits R220 Size Unit, Bucket has been cut down to accept a Coupler, Has FLARE TEETH AND SIDE CUTTERS

1/2 Yard Forklift Dump Hopper, With Safety Chain and Fork lift retaining chain

24" Bucket 1-3/4 Front Pin, 1-1/2 Back Pin, Pins Not included

Low Flow Requires 21-28 GPM of Hydraulic Flow, Cuts Up to 10" Brush Most rugged skid-steer brush cutter on the market.RENTAL 240 Day, 960 Week, 2880 Month

Over the Tire Tracks to fit a Mustang 2050, or 2054 w a 38.5" Wheelbase LOW HOURS USE, We sold the Skid steer these came on

1.1 Yard Bucket for 410B.

Mini Skid Steer Breaker

96" Carriage 96" X 2.5" X 6" Forks fits 416 JRB COUPLER

36" Wide TOOTH to TOOTH, 41-1/2" Wide Cutter to Cutter, 14-1/4" Pin Centers, 10.5" Between Ears, 65MM Pins ESCO T28SYL Teeth PINS NOT INCLUDED IN PRICE

49" Bucket w Side Cutters, 90MM Pins, 16-1/2" Between Ears, 18-5/8" Pin Centers, 63" Tip Radius, Hensley 400 Teeth, Includes 2 Dead Pins

REMOVED FROM R235, Will also fiat a R210

10,000LB Capacity Telehandler Positioning Forks w 60" Long Forks.

OSHA approved, HD Mesh Floor, End Fork Slots for Loading or Unloading Collapsible for Easy Transport, 1000LB Capacity, works on 42 or 48" Forks 3-1/2" X 7-1/2" Fork Pocket Size RENT 50.00 Day, 200 Week, 600 Month

60" Cutter, set up to Work on an Excavator, Hyd Drive 80HP Gearbox

30", .64 YD X220 Teeth, 65MM Pins Not Included in Price, But are available