Used Equipment Loader Attachments For Sale In Buffalo

325C -330C with ripper pocket 1.5 Yard 42" bottom takes 80-90mm pin

6.3 yard bucket 77" wide fits 385c cat

80 mm pins appears to fit 200 John Deere

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Heater/AC: Heater/AC unit is present with this cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Other (Tag Info, etc.): The certification tag is attached in the upper RH, rear corner of this cab.

No cracks or repairs have been found.. Weight: 6,200 lbs. Description: All of the pin holes on this boom appear to be in decent shape. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long

Weight:5,000 lbs. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long The machine this boom was on had burned and the base of the boom has taken a little heat from the fire.

Weight:5,000 lbs. Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos).

The bushing for the pin hole where the bucket pins to the stick looks like it may have some wear. There are no cracks or repairs present on this stick. All of the other pin holes look good.

Weight: 1,100 lbs. Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to the bottom of it.

No cracks have been found. Weight: 3,800 lbs. Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long

Stick Information

HAS A/C WHICH IS NOT WORKING. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. ALL WIPER ARMS MISSING. VINYL SEAT HAS A FEW TEARS IN IT. CONTROL LINKAGE HAS SOME WEAR.

Weight: 1,500 lbs. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to it.

Weight: 2500 lbs. Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear.

Long Angling Frame Dimensions: 4 ft. A debris guard was fabricated and is welded to the top of the blade. Wide, 13 ½ ft. The angling frame overall appears to be in decent condition.

Weight: 1,800 lbs. Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long

GEARAMATIC WITH DRIVE SHAFTS.

Weight: 1,500 lbs. Description: All of the pin holes on this boom are in good shape and no cracks have been found. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

No cracks or repairs have been found. Weight: 2,000 lbs. Description: All of the pin holes on this boom appear to be in good shape. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long

(Outer bushing part number: 61EN-13320). This stick has a mount welded to the bottom of it. All of the pin holes appear to be in good shape. This stick is missing both outer bushings for the bucket pin.

It includes the following components: Boom-25 foot long boom section. Mid-section-15 foot long mid-section. Boom to mid-section cylinder-The working condition of this cylinder is unknown.

NOT INSTALLED ... RECEIVED CAB GLASS NEW...