Used Equipment Loader And Skid Steer Attachments For Sale In Buffalo

22" Field Load Conveyor 12000 BPH 16" tube 22" belt Windguard Collapsible hopper 12.5 HP Motor & Switch

2014 Cat 924K great condition, low hours, heat/ac, radio, quick coupler, fusion bucket A/C, Auxiliary Hydraulics, Quick Attach

Attachments available too! Call today! Brand new condition

325C -330C with ripper pocket 1.5 Yard 42" bottom takes 80-90mm pin

6.3 yard bucket 77" wide fits 385c cat

80 mm pins appears to fit 200 John Deere

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Heater/AC: Heater/AC unit is present with this cab shell. Cab Door: The door is in good shape. Wipers: The wiper assembly is present with the cab shell. Gauges, Controls, Function Buttons: Some of the pieces are with the cab shell.

Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Weight: 6,200 lbs. No cracks or repairs have been found.. Description: All of the pin holes on this boom appear to be in decent shape.

Weight:5,000 lbs. The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. No warping appears to be present. All of the pin holes on this boom are in good condition and no cracks have been found.

Weight:5,000 lbs. On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). The rest of the boom looks good. Description: All of the pin holes on this stick are in good condtition.

Weight: 2100 lbs. Description: The working length of this stick is 10 feet, 3 inches or 3.1 Meters. There are no cracks or repairs present on this stick. Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick...

Weight: 1,100 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to the bottom of it. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters.

Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Weight: 3,800 lbs. No cracks have been found. Description: All of the pin holes and all of the pin boss surfaces look good on this boom.

Stick Information

VINYL SEAT HAS A FEW TEARS IN IT. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. CONTROL LINKAGE HAS SOME WEAR. ALL WIPER ARMS MISSING. HAS A/C WHICH IS NOT WORKING.

Weight: 1,500 lbs. All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to it. Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters.

Weight: 2500 lbs. All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear. No cracks have been found. Description: The pin holes for the bellcrank pin, have a little wear and the boss surfaces around...

Repairs/Modifications: The moldboard has been refaced and hard-facing applied to it. The moldboard has been refaced with a series of seven plates that run the width of the blade and hard-facing has been applied to it, just above the cutting edges.

Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Weight: 1,800 lbs. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long

GEARAMATIC WITH DRIVE SHAFTS.

Description: All of the pin holes on this boom are in good shape and no cracks have been found. Weight: 1,500 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Weight: 2,000 lbs. No cracks or repairs have been found. Description: All of the pin holes on this boom appear to be in good shape.