The wrench flats make installation an easy task for this one piece body that fits standard 1/2" connections. Even the smallest pgis like the easy bite trigger and tapered end on the Spiglet.
The pen is 81" tall, 11' long and 157" wide. Constructed of 14 gauge tubing, this model has a 4' floor to stabilize the pen and a split nursing panel of 34" on both sides. NEW FROM FOR-MOST...the 90 degree Round Calving pen for easy crowding & nursing...
With standard 348 RPM power unit. Delivery Rate = 220 lb./min. Used to convey high moisture corn, large pellets, shelled corn or ground feed. Maximum moisture content = 27%. Chore-Time Model 108 Flex Auger.
We have added features that make this a great chute for large producers or veterinarians. From standing behind the chute looking thru it it has a Left Hand Exit. Chute controls are all on one side and out of the operator's way.
It breaks down into seven sections for handling and transport with the heaviest section weighing 200 pounds. Adjustment rods are provided to prevent animals from pushing the tub out of shape.
We have added features that make this a great chute for large producers or veterinarians. From standing behind the chute looking thru it it has a Right Hand Exit. Chute controls are all on one side and out of the operator's way.
3 year warranty Feeder is not intended to sit flat on the ground. Comes in Black, Forrest Green, Blue, Red & Tan. Feeder has sloped bottom to allow for easy draining & cleaning. 34 1/2" x 19 3/4" x 27 1/2".
This panel is 10 ft long, 5 1/2 tall 7 bar corral panel. Pin connectors are easy to use & work well on uneven ground. But if you have to replace bent up panels every few years, did you really save any money?
Holds 25 pounds of bird feed. This feeder is easy to fill, made of 20 ga. G90 Galvanized steel. Made in the near by state of Missouri, here is a poultry feeder for your 4H project or small producers raising a few head of livestock.
Telescoping Drive Tube/Handle also available CT47638 Chore-Time Single Manual Slide Assembly. Rack and Pinion style Slide Shut-Off assembly for Single Auger Boots.
Sides are closed to a height of 42" to prevent protruding feet. The 450 series is the top of the line For-Most manual chute. From behind the chute looking thru it controls are on the Right Hand side.
Comes with boot, anchor and bearing assembly, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate a Single M55 auger exiting the boot at a 30� angle.
It runs on LP or convert to natural gas, developing 4050 BTU per hour. Mount this unit under livestock waterers. An efficient way to revent freezing. An adjustable automatic thermostat permits you to control the temperature for whatever the condition.
Replacement parts: Motor = CT6857, Pinion Gear = CT6104, Gearhead = CT32617 Chore-Time Model 75/90/HMC/108 1HP, 348RPM, 230V, 60HZ, 1PH Power Unit. Used on M75 Flex Auger sysems from 160' - 200' in length, M90 & HMC Flex Auger sysems from 100' - 50' in...
Enable multiple feedings per sow per day by automating drop feeders with one of the proven CHORE-TIME � Winch systems. Easy-to-read feed level adjustment allows feeding individual amounts from 3/4 to 10 pounds (0.3 to 4.5 kg).
All Models use the same tried & proven non-siphoning trouble free 393 valve. Big enough for sows, yet small enough for baby pigs. Trojan's Cast Iron Cup with powder coat finish "Super Stong".
Comes with boot, anchor and bearing assemblies, slide shut-off kit and side access door assembly. This is a complete Lower Boot that will accomodate Two M90 augers exiting the boot horizontal to the ground.
