Used Equipment Lawn And Garden Attachments For Sale In Buffalo

6.3 yard bucket 77" wide fits 385c cat

80 mm pins appears to fit 200 John Deere

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Interior Panels, Covers, Vents: There are a few panels with this cab shell. Cab Overall Condition Rating (1-10, 1= Worst, 10=Best): 7 Weight for Shipping: 2,000 lbs. Heater/AC: Heater/AC unit is present with this cab shell.

Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long No cracks or repairs have been found.. Weight: 6,200 lbs. Description: All of the pin holes on this boom appear to be in decent shape.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. All of the pin holes on this boom are in good condition and no cracks have...

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). Description: All of the pin holes on this stick are in good condtition.

All of the other pin holes look good. Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. There are no cracks or repairs present on this stick.

Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 2 inches or 2.8 meters.

Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long No cracks have been found. Weight: 3,800 lbs. Description: All of the pin holes and all of the pin boss surfaces look good on this boom.

Stick Information

ALL WIPER ARMS MISSING. CONTROL LINKAGE HAS SOME WEAR. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. VINYL SEAT HAS A FEW TEARS IN IT. HAS A/C WHICH IS NOT WORKING.

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. Description: The working length of this stick is 9 feet, 7 1/2 inches long or 2.94 meters.

Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear.

Dimensions for Shipping (Height x Width x Length): Blade Dimensions: 2 ft. Condition of Moldboard: Other than some wear at both bottom corners, the bottom of the moldboard appears to be in good shape.

Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long Weight: 1,800 lbs. Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found.

GEARAMATIC WITH DRIVE SHAFTS.

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long Weight: 1,500 lbs. Description: All of the pin holes on this boom are in good shape and no cracks have been found.

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long No cracks or repairs have been found. Weight: 2,000 lbs. Description: All of the pin holes on this boom appear to be in good shape.

The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. All of the pin holes appear to be in good shape. This stick is missing both outer bushings for the bucket pin.

All of the pin holes appear to be in good shape and no cracks can be seen. It includes the following components: Boom-25 foot long boom section. Description: This is a complete, 3 piece material handling boom set-up.

NOT INSTALLED ... RECEIVED CAB GLASS NEW...

There two cracks on this stick (see photos) near where the stick cylinder pins to it. Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has whats left of a thumb mount, welded to it.

6.6 METER Weight: 9,000 lbs. Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long

Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long All of the pin holes look good and no cracks have been found. Description: The working length of this stick is 11 feet, 4 inches.