Used Equipment John Deere Precision Ag Equipment For Sale In Vermillion

Serviced through shop. Used Minnesota Model 8078 Rugged 8 8-ton wagon running gear, extension tongue with spring lift assist, 11LX15 tires (two tires are new, other two tires are good).

Please call for details. New Notch 8BT-19K round bale transport with 2-bale cradle (10-bale capacity), 8"X16" front wheels with used heavy duty pickup tires, used 10-22.5 rear tires.

John Deere 1209 9-foot mower conditioner, 540 PTO, hydraulic lift cylinder, hydraulic swing tongue with cylinder and hoses, equal angle hitch.

Please call for details. Maximum capacity 22,000 lbs. New 2017 Notch 10BT 10-bale round bale transport with 2BT cradle (increases transport capacity from 10 bales to 12 bales), used 23580-22.5 front tires, used 385X22.5 rear tires, rear transport light...

Maximum capacity 30,000 lbs. New 2018 Notch 10BT-30K 10-bale round bale transport with 2BT cradle (increases transport capacity from 10 bales to 12 bales), used 255/70R22.5 front tires, used 385/65R22.5 rear tires, rear transport light package.

Hitch, 540 rear PTO, manual steering. 1955 John Deere 70 2wd gas tractor, like-new 14.9X38 Firestone rear tires, wide front axle, factory 3 pt. Has tach but tach not working.

New 2017 Walco/Horst 185 10-ton wagon running gear, extension tongue with tongue spring lift assist, 15X8 rims with new 11LX15 8-ply tires.

Please call for details. New HLA Horst CHCF36 36-foot, 4-wheel-steer header trailer with 235 85 R16 LR F tires, 30-foot wheel base, 36-foot top rail. Note: This header trailer has been sold, but new models are available.

Dual spindle cutter, dual laminated caster gauge wheels, CAT 4 540 PTO with slip clutch, front & rear chain guards, CAT II & CAT III quick hitch, requires approximately 80 hp, 3" cutting capacity.

New Rhino 284 84" 3 point rotary cutter, Q-hitch compatible, one rear 15" gauge wheel, 540 PTO with slip clutch, front and rear rubber deflectors, two 1/2" X 4" blades, 130 hp-rated gear box, rquires minimum of 60 PTO hp, 2½" cut capacity, blade tip...

Please call for details. Rated capacity 15,840 lbs. New HLA Horst CHC30 30-foot header trailer with ST235 85R16 Carlisle TL LRF tires, black color, 18-foot wheelbase with 31-foot top rail.

Lists @ $1,950. New Rhino TW16 72" Cat I 3 pt. Cutter, Cat 3 540 PTO drive, shear bolt protection, 60 hp gear-box rating, requires minimum of 25 PTO hp, 1/2" X 3" blades, 1" cut capacity, weighs 550 lbs., New Holland blue color.

Weighs 2,750 lbs. Requires 35 to 60 hp tractor. New 2018 Rhino TS12 12' flex-wing cutter, 540 slip clutch PTO, 1/2" X 3" blades, Rhino orange color, 1½" maximum cut diameter, cutting height 2" to 12", front & rear chain guards, set of four 20" foam-filled...

New JBM (Walco) 141403 7-foot wide by 24-foot long Cattleman's Choice feeder wagon with front dolly wheels, 46 feeding spaces, 16" 10-ply used truck tires with new tubes, tow hitch on rear extension tongue, inside double bar hinge open for clean-out,...

New JBM (Walco) 141407 8-foot wide by 24-foot long Cattleman's Choice feeder wagon with front dolly wheels, 46 feeding spaces, 16" 10-ply used truck tires with new tubes, tow hitch on rear extension tongue, inside double bar hinge open for clean-out,...

Please call for details. John BM 141402 (Walco) 7' X 20' Cattleman's Choice feeder wagon, hinged rear gate, double bar, dolly wheel, extension tongue, used 16" 10-ply tires with tubes.

Please call for details. John BM 141402 (Walco) 7' X 20' Cattleman's Choice feeder wagon, hinged rear gate, double bar, dolly wheel, extension tongue, used 16" 10-ply tires with tubes.

New mount kit available to fit other tractor brands/models. Includes 72" quick tach bucket, hoses from loader to tractor, rear remote valves. Loader was removed from New Holland TS100A 2wd tractor.

Used Kewanee Model 140 18-foot disk, manual fold wings, 7½" blade spacing, front blades measure 18½", rear blades measure 19½", dual wheels on main fame, hydraulic cylinder with hoses (disk measures approximately 11 feet if wings are folded up or removed),...

White 508 4-bottom plow, SAR, with cylinder and hoses, adjustable 16" to 18".

Serviced through shop. IH 720 5 bottom furrow plow, spring reset, coulters, lift cylinder with hoses, gauge wheel, Cat III hitch bar, excellent moldboards and coulters.

Could use paint. Used Schulte RSH4 rock picker, conveyor chain pickup, new bearings just installed in both chain idler sprockets. Serviced through shop; good condition.

One owner; very good condition. Melroe 5-section coil-tine harrow on transport cart, 27 foot width (three 5-foot sections and two 6-foot sections), good teeth, original paint.

Serviced through shop and field ready. White 435 8 shank disc chisel plow, eight concave cutter blades, hydraulic lift cylinder with hydraulic depth stop, walking tandem axles, new twist shovels, original blades like new condition.

Good condition. Please call for details. Parting out White 435 9-shank disk chisel plow with rigid shanks. Remaining salvage parts: 9 shank main frame, rock shaft, rigid shanks, tool bar for cutter discs.

Call with your needs. Note: This disk was originally a 25'0" disk with 9" blade spacings. Price does not include wing fold cylinders shown in photos. Used White 273 12' disk (center frame without wings), center coil attachment, front blades measure 19",...