Used Equipment John Deere Precision Ag Equipment For Sale In Peoria

Call Matt and I'll send you a picture. 1995 F-250 SuperCab, Longbed, XLT, V8 7.5 liter engine, automatic, 2-wheel drive, 139,000 miles, air conditioning, power- steering, windows, doors, tilt wheel, cruise control, AM/FM cassette, sliding rear window,...

FACTORY CAB, HEAT, GP BUCKET W/ TEETH, NEW TURBO, ENGINE REBUILT 1500 HOURS AGO AT CAT DEALER, 2 LEVER CONTROLS, 20" PADS, 50% U/C, HYSTAT TO SPEC, GOOD SOLID LOADER, ROPSTYPE: ENCLOSED, HOURS: 3978

CAB, HEAT, 4X4, EXTEND-A-HOE, 3 BUCKET (18", 24", 36"), 18.4-24 REAR TIRES @ 90/60%, 14-17.5 FRONT TIRES @ 60%, EXCELLENT CONDITION, FROM LOCAL CONTRACT WITH VERY GOOD MAINTENANCE PROGRAM, BOOKS INCLUDED, HOURS: 7568, DRIVE: 4WD, ROPSTYPE: ENCLOSED

CAB, A/C, HEAT, 4X4, EXTEND-A-HOE, MANUAL Q/C, 2 BUCKETS (24" & 48"), 12.5 80-18 FRONT TIRES @ 80/60%, 18.4-24 REAR TIRES @ 60%, EXCELLENT CONDITION, FROM LOCAL CONTRACTOR WITH VERY GOOD MAINTENANCE PROGRAM, BOOKS INCLUDED, DRIVE: 4WD

CAB, HEAT, AUXILIARY HYD, HEAVY DUTY DEMO / GRAPPLE BUCKET (8'8" WIDE), GP OR MP BUCKET AVAILABLE, 20" PADS, 80% U/C, HYSTAT PRESSURES GOOD, WELL MAINTAINED, VERY GOOD CONDITION, ROPSTYPE: NONE, HOURS: 1868

CAB, 39" FORKS (GP BUCKET AVAILABLE), 17.5X25 TIRES @ 70%, GOOD BRAKES, THROUGH SHOP / RUNS OUT STRONG.

OROPS, SWEEPS, REAR SCREEN, 6'8" GP BKT, 15" PADS, 70% U/C, THROUGH SHOP (3 HYD. REPACKED), STEERS & RUNS OUT VERY GOOD, NICE LOADER!, HOURS: 1480, ROPSTYPE: OPEN

ONE OWNER LOCAL CONSIGNMENT, LOADED, CAB, A/C, RADIO, RIDE CONTROL, 4X4, E - STICK, IT (FRONT COUPLER), AUX. (FRONT & REAR), FRONT GP BUCKET & 48" FORKS, WAIN ROY EXCAVATOR Q/C W/ 24" BUCKET (MORE BUCKETS AVAILABLE), 70% TIRES, EXCELLENT PHYSICALLY &...

CAB, A/C & HEAT, Q/C, 3.75 YD GP BUCKET, FORKS & JIB AVAILABLE, 23.5R25 RADIAL TIRES (FRONTS-90%, REARS-40%), RIDE CONTROL, BLOCK HEATER, THROUGH SHOP / WORK READY, AIRCONDITIONING: YES, ROPSTYPE: ENCLOSED, HOURS: 14933

1980 D9H DOZER, EROPS, HEAT, 9U/TILT BLADE, B-B OK, BLADE 50% TIGHT, 7" BLOCK IDLER MEASURE, U/C 70% AVERAGE

CAB, A/C (INOPERABLE), GP BUCKET W/ BOLT ON CUTTING EDGE, 29.5X25 L4 TIRES @ 70%, TIGHT, RUNS OUT STRONG, GOOD BRAKES, USED TO LOAD COAL AT LOCAL PLASTICS PLANT.

DON'T LET HOURS SCARE YOU ON THIS ONE. CAB, HEAT, GRAPPLE FORKS, AUXILIARY HYDRAULICS, JOY STICK CONTROL, 20.5X25 TIRES (FRONTS-10%, REARS-70%), EXCEPTIONALLY CLEAN/TIGHT/STRAIGHT.

CYLINDERS REPACKED, OIL LEAKS REPAIRED, ETC.), OVERALL SOLID LOADER. CAB, HEAT, 2.0 YD GP BKT, 14.00X24 TIRES, GOOD BRAKES, BLOCK HEATER, STRONG RUNNING, TIGHT, THROUGH SHOP (KICKOUT WORKS, HYD.

MOTOR, ENGINE REBUILT APPROX. 72" SMOOTH DRUM VIBRATORY ROLLER, 14.00X24 TIRES @ 80%, TIGHT, RUNS OUT STRONG, COMES FROM LOCAL CONTRACTOR WITH VERY GOOD MAINTENANCE PROGRAM, LESS THAN 200 HOURS ON NEW VIB.

FACTORY CAB W/ HEAT (NO A/C), GP BUCKET W/ TEETH & SEGMENTS, 22" PADS, 80%+ U/C, VERY TIGHT & STRAIGHT, NO LEAKS, RUNS OUT STRONG, HYSTAT TO SPEC, THROUGH SHOP / WORK READY, HOURS: 9175, ROPSTYPE: ENCLOSED, AIRCONDITIONING: NO

3 Piece Cat Extendable Boom/Jib to fit Cat IT Loaders

132" Cat GP Bkt, Bolt On Cutting Edge, VGC, Part #5V7355, 5.25 YD

Cat 7T2512 Draw bar with Pin, 7T6915 Power Train Guard, 7T5611 Rear Guard.

9'1" Balderson MP Bucket (2.75 YD) to fit Cat 963 Quick Coupler (23.5-5-2), Bolt on Cutting Edge, Very Good Condition

Cat 7T2512 Drawbar w/ Pin, 7T6915 Powertrain Guard

Teledyne Good Used, Model: TC150, 40"x28", (2.5, 9.25, 14) (1.5, 10.25, 14), 2 Pins with Bushings, 2000 PSI Op. Press, 2500 PSI Relief, 26-32 GPM Flow, 1800lbs., See Video (Working Condition)

Cat 8'2" GP Bucket, Fits Q/C, Bolt On Cutting Edge, Part #224-9348, Q/C Available (23.5-5-2)

20.5R25 Michelin XGC, 2 Star, 80% +, Clean, $3,000 New

Cat 7T2512 Drawbar w/ Pin, 7T5611 Rear Guard

54" Cat Forks, GC, Slidelock Pins

General E3, 32 Ply, 1 Center Section, Rock Cut Tread, Good Side Walls, 65%

8'5" Cat GP Bucket, 8 teeth, Excellent Cond., no Cracks/Welds, Cat Part #4V3224, 2.7 YD