Used Equipment John Deere Precision Ag Equipment For Sale In Brookshire

Balderson Blade with Quick Connect for Wheel Loader 988 In good condition was used with a 988F wheel loader.

Fits Caterpillar 140H, 143H, 160H, 163H, 104G

Butterfly valves and flange valves are brand new. This trailer has been sand blasted and has fresh paint, the liner on the inside is brand new, just lined. Ready to work, DOT inspected.

1999 Galbreath Model: A5-OR-402 Roll Off Trailer, Tri-axle with big tires, 30,000lbs G.VW.R, 21,200lbs G.A.W.R., cable hoist roll off, 5th wheel. Solid frame, no rust or dents, etc.

6 x 14.00 x 24 Tires Only @ 50% Remaining.

Both Blade and bucket for 988B

Original Cat Multi Shank Ripper Came Of A 140H Has 3 Cat Ripper And 8 Cat Scarifier Shanks, In Excellent Conditoin . Complete With Mounting Rods.

Truck sells DOT inspected, ready to work. Very, very powerful Wittig HYDRAULIC vacuum pump. Tanks tilts and dumps and has full open hydraulic rear gate. A/C Condition: Excellent, A/C, Differential Lock, State DOT

Sells DOT inspected. This truck has been serviced at the Peterbilt dealer as well. Vacuum pump and operational equipment is all working, new valves in the rear, new wing nuts for the manway hatches top of tank and rear manway.

Mack 427HP engine, eaton fuller 13 speed, NVE vacuum pump with transfer gear pump too, tandem axle, air ride, 3,500 gallon vacuum tank, 3.90 ratio, 230"in wheelbase, 12,000lbs fronts and 40,000lbs rears.

2001 Mack RD688S Bobtail Kill Truck/ pressure truck/ pump truck with 60BBL Vacuum tank, with 260,000 miles, Gardner Denver Tee Triplex pump at 10,000psi, bowie centrifugal pump, tandem axle, 20,000 fronts and 46,000 rears.

Water heater boiler. Fresh engine oil change. Aluminum tanks all around, fresh paint, 12 yard debris tank and 1,200 gallon of fresh water, boom extends 22ft. 2008 International 7600 Vactor HXX Hydroexcavator with a big blower, Hibon 8702, 29"HG, 5600...

4 Beam style frame, with tail roller in the back. OVERALL LENGTH : 59'-8" MAIN DECK LENGTH : 45' UPPER DECK LENGTH : 14'-6" WIDTH : 102" SWING CLEARANCE : 102" - 120" KING PIN SETTING : 16" - 34" DECK HEIGHT : 40" - 41"

Truck has aluminum fenders in the rear, not bend or scratched. 18k fronts and 44k rears on camelback suspension. A/C Condition: Excellent, A/C, Differential Lock, State DOT, Turbo Hydraulic tarp with brand new tarp on it.

Beautiful monster 2006 Mack Granite CV713 Gin Pole Winch Truck with 123,000 miles!!! Mack AMI 12.0L engine, 338" Wheelbase, 29" poles, 34" bed, 3 winches: Rufnek 130,000lbs, Rufnek 80,000lbs and Rufnek 20,000lbs.

Heavy specs, double frame, 20,000lbs fronts and 46,000lbs rears. Tandem axle, full tank tilt and full open hydraulic rear gate. The truck will have new filter bags, the truck has been sandblasted already and is being primed right now ready for paint.

14,600lbs and 46,000lbs rears. These trucks are working good, and have no problems. A/C Condition: Excellent, A/C, Differential Lock, State DOT, Turbo One has 60k miles and the other has 102k miles, Cummins ISX 475HP, Eaton Fuller 18 speed, Gardener Denver...

Heavy specs, double frame, 20,000lbs fronts and 46,000lbs rears. The truck will has new filter bags. This truck is ready to work. Roots Trinado LR05-4507 blower, 29” HG and 5,600cfm.

Boom reach is 26". Has a 12 cubic yard debris body, 4,000psi quintuplex pump all in a heated enclosure. A/C Condition: Excellent, A/C, Differential Lock, State DOT, Lift Axle, Lift Axle Type: Mid, Turbo

Eaton 10 speed transmission, PTO, good tires, tank meter. 4" inlet and 6" outlet. Works for chemical plants, refineries, septic, grease traps, etc. Keith Huber DOT code/ Hazmat 3,030gal 407/412.

MADE IN USA NEW / UNUSED SCARIFIER NEW UN TO FIT 140M, 12M, 160M . COMES EQUIPPED WITH 5 SHANKS IN STOCK READY FOR DELIVERY.

Good Tires All Around, Has A Blower

Beautiful 2013 Kenworth T800 Winch Truck ready to get the job done. Real clean truck, no check lights, air leaks or oil leaks. Sells DOT inspected. Chalmers suspension. Truck is ready to work.

353,000 miles, Maxitorque 13 speed transmission, Tulsa 45,000lbs hydraulic winch and has 2016 Jurop PN84 vacuum pump, leather seats, chrome exhaust, half roller tailboard in the back, Mack 427HP engine, aluminum tanks, aluminum front wheels, 90% tires...