Used Equipment Headlamp Assemblies For Sale In Arizona

Clean Freightliner Cascadia Mirrors...more than one pair available!

The Coburn Compact featuring the Kaeser Tri-Lobe Vacuum Pump is a vacuum pump assembly occupying a minimum amount of space in the milking barn or parlor. Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped...

USED SWITCH DASH ASSEMBLY FOR 2010 INTERNATIONAL PROSTAR

Less vacuum fluctuation when liners are fitted and removed, thus avoiding vacuum drop or intake of dirt. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

The Vanguard Milking Claw Assembly includes two 0056/0002 silicone liners, two 2200/3211 plastic shells, silicone milk tubing and clear air tubing for a ready-made goat milking assembly.

Less vacuum fluctuation when liners are fitted and removed, thus avoiding vacuum drop or intake of dirt. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

Heavy Duty Vanguard Milking Claw Assembly is a ready-made milking set-up for one sheep. Assembly includes unvented Vanguard Claw with shut-off, silicone milk tubing, clear milk bend, clear air tubing, two 281 clear silicone liners and two heavy duty...

The ITP205 Assembly for sheep includes two claws, 0/385 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP205 Assembly for sheep includes two claws, 0/301 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

Less vacuum fluctuation when liners are fitted and removed, thus avoiding vacuum drop or intake of dirt. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

The ITP205 Assembly for sheep includes two claws, 0/300 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP205 Assembly for sheep includes two claws, 0/386 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

The Vanguard Milking Claw Assembly includes two 0/524 silicone liners, two 2200/3209 plastic shells, silicone milk tubing and clear air tubing for a ready-made sheep milking assembly.

Less vacuum fluctuation when liners are fitted and removed, thus avoiding vacuum drop or intake of dirt. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.

Number "3" on schematic diagram.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Number "2" on schematic diagram.

Number "6" on schematic diagram

Number 5 on schematic diagram.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Number "8" on schematic diagram.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. When supporting a vacuum level of 13.5", it spins at 4209 RPM at 85% speed, moves 252 CFM and...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. When supporting a vacuum level of 13.5", it spins at 4735 RPM at 82% speed, moves 116 CFM and...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. When supporting a vacuum level of 13.5", it spins at 4261 RPM at 85% speed, moves 190 CFM and...