Used Equipment Hay For Sale In Hills

Working width: 22' 5"-24' 5".

Opticut silage baler 14 knives, 4 x 6 bales, VT50 monitor, 14,000 bales.

20' stock chopper.

Special hood design for windrowing, 1/4" steel hood throughout, 1/4" x 14" OD X 18" pitch end delivery auger. Center drive shredder, right hand windrow discharge, pull type, 1.25" PTO.

$7,500 Discount Available - bale wrapper round or square

Required tractor hydraulic connections: 1 SA with 3/4" free return. Output and pressure required: Standard 11-16 gpm at 6,000 psi. Transport width (ft) 8'2". Pre-stretcher: standard 30", Pre-stretch ratio: standard 60%-optional 70%.

.$3,500 Discount Available

3pt CAT II hitch, 7; working width, 540, min PTO HP 65, max PTO HP 90, 24 knives, HYD Side shift. Ditch bank mower.

Twin Gyro Rake, 2 pt Semi Mounted, 2 Rotors, 11 Arms per Rotor, 4 Tines per Arm, Working Width 22.5" to 24.5", Clean Swept Width 21'10" to 23'9",PTO-S.WWE2280 13/8-6 F5/1R 910, Rear Steering, Wheel Set 10/75-15.3, Lights and Signaling, Hyd Adj of Working...

Minimum PTO HP: 100 2 pickups & conveyors. 2/3/3N or drawbar hitch type. Pickup working width: 23'10", Pickup Height: 5/8"-3 1/8". Minimum Hydraulic Parts Required: 10 GPM at 1650 PSI.

Belco Econo Wrap EW-450S Bale Wrapper, 3 Pt Hitch, Stationary Wrapper

Rear tires are 10/16.5, Front Tires are 11L-15. Steer from tractor. In line bale wrapper. Up to 4 bales a minute. Does round bales up to 6'6" and square bales up to 5'6". Has Honda GX 630 electric start, 20 hp motor.

8 wheel, 3 pt rake.

GA 3200 GT GYRORAKE, 9 Arms, 3 Tires Per Arm, Working Width 10'6", Clean Swept 7'3", 540 PTO, 20 hpmin

12 Wheel Rake, Working Width 18'9" to 23'4", Includes Optional 55" Kicker

VB 3195 Opticut Round Baler, Pivoting Pickup Wheels, Bale Kicker,

4 rotors, 7 tine arms per rotor, working width 17' 1", PTO required 20 hp minimum, 1 DA hydraulic connection .

14 Wheel Rake, Tandem Axles, Working Width up to 28'

$6,000 Discount Available - Opticut 23, high silage, 3D wrapping unit w/ pivoting pre stretchers.

Working width is 8'6", 2 rotors, 7 tine arms per rotor, drawbar, 540 PTO speed, transport width is 9'10", transport height is 9'2", 1,170 lbs, Tractor hydraulic equipment: 1 DA, requires 20 hp tractor power.

$8,000 Discount Available - 3x4 bales,6 knotters, Double knotter, Dual hydraulic-driven fans, 30 twine capacity (rolls), opticut, Individual hydraulic knife protection, Hydraulic brakes, 170 hp/127 kW, 2 SA and 1 DA

13' working width, 107 minimum PTO HP required, roller conditioner is a diamond block, 1 SA & 1 DA hydraulic connection.