Used Equipment Harvest Equipment For Sale In Brookshire

Balderson Blade with Quick Connect for Wheel Loader 988 In good condition was used with a 988F wheel loader.

Fits Caterpillar 140H, 143H, 160H, 163H, 104G

I can throw in piping that came with it. Its ready to work. This trailer has been sand blasted and has fresh paint, the liner on the inside is brand new, just lined. Ready to work, DOT inspected.

Works good, good rails. 1999 Galbreath Model: A5-OR-402 Roll Off Trailer, Tri-axle with big tires, 30,000lbs G.VW.R, 21,200lbs G.A.W.R., cable hoist roll off, 5th wheel. Spring suspension.

6 x 14.00 x 24 Tires Only @ 50% Remaining.

Both Blade and bucket for 988B

Original Cat Multi Shank Ripper Came Of A 140H Has 3 Cat Ripper And 8 Cat Scarifier Shanks, In Excellent Conditoin . Complete With Mounting Rods.

Truck sells DOT inspected, ready to work. A/C Condition: Excellent, A/C, Differential Lock, State DOT Stainless steel NVE air activated and manual safety valves in the rear, DOT approved.

Will ship anywhere. All gauges and instrumentation is working. Vacuum pump and operational equipment is all working, new valves in the rear, new wing nuts for the manway hatches top of tank and rear manway.

Mack 427HP engine, eaton fuller 13 speed, NVE vacuum pump with transfer gear pump too, tandem axle, air ride, 3,500 gallon vacuum tank, 3.90 ratio, 230"in wheelbase, 12,000lbs fronts and 40,000lbs rears.

Double frame, Maxitorque 13 speed. 2001 Mack RD688S Bobtail Kill Truck/ pressure truck/ pump truck with 60BBL Vacuum tank, with 260,000 miles, Gardner Denver Tee Triplex pump at 10,000psi, bowie centrifugal pump, tandem axle, 20,000 fronts and 46,000...

Fresh engine oil change. Truck sells ready to work, DOT inspected. Water heater boiler. 2008 International 7600 Vactor HXX Hydroexcavator with a big blower, Hibon 8702, 29"HG, 5600 cfm, Caterpillar C13, Eaton Fuller 10 speed, full open rear gate, full...

2008 Traileze 4 axle Lowboy/ RGN/ oil field trailer, 25,000lbs each axle with air lift on 1st and 4th. Air ride with shock absorber straps. OVERALL LENGTH : 59'-8" MAIN DECK LENGTH : 45' UPPER DECK LENGTH : 14'-6" WIDTH : 102" SWING CLEARANCE : 102" -...

18k fronts and 44k rears on camelback suspension. Clean and ready to work. It has inside cab control as well as controls in the outside. Truck sells DOT inspected, fresh tires all around, no check lights, all gauges in the cab working, all equipment working...

Eaton Fuller 8 speed with lo, lo, lo. Beautiful monster 2006 Mack Granite CV713 Gin Pole Winch Truck with 123,000 miles!!! Mack AMI 12.0L engine, 338" Wheelbase, 29" poles, 34" bed, 3 winches: Rufnek 130,000lbs, Rufnek 80,000lbs and Rufnek 20,000lbs.

The dash on interior is very good, no broken pieces on dash or cracks. Truck will be painted and will have all warning and hazard decals from manufacturer. Blower hours are 3,002 hours.

Cab paint is still original, 90% tires all around. Buyer pays shipping. One has 60k miles and the other has 102k miles, Cummins ISX 475HP, Eaton Fuller 18 speed, Gardener Denver TEEAC 5,000psi pump, MCM 3X4 pump, NVE Challenger 367 vacuum pump, NuFlow...

The truck will has new filter bags. 2 AVAILABLE: Will ship anywhere!!! 2006 Sterling Superproducts Supersucker Air Mover. All the control panel gauges are new, rpm gauge, air vacuum gauge, etc.

Has a 12 cubic yard debris body, 4,000psi quintuplex pump all in a heated enclosure. FINANCING AVAILABLE AT LOW RATES 6 Ramvac Hydrovacs available on Kenworth chasis. Sells ready to work, DOT inspected.

4" inlet and 6" outlet. I have 3 available. No check lights, no air leaks, no nothing. Caterpillar C7 engine. Powered by a very powerful Wittig vacuum pump. 2005 Sterling Vacuum Truck DOT CODE/HAZMAT/ 407/412.

MADE IN USA NEW / UNUSED SCARIFIER NEW UN TO FIT 140M, 12M, 160M . COMES EQUIPPED WITH 5 SHANKS IN STOCK READY FOR DELIVERY.

Good Tires All Around, Has A Blower

Cummins ISX 450HP, wet kit, engine, flat top sleeper cab, Eaton Fuller 13 speed, 247,000 miles. Beautiful 2013 Kenworth T800 Winch Truck ready to get the job done. It has full rolling tailboard, hydraulic Tulsa 45,000lbs winch and a hydraulic NVE 367...

Can haul frac tanks and you can haul vacuum tankers with the pump, or use the winch to assist with loads. Truck is ready to work, DOT inspected. 353,000 miles, Maxitorque 13 speed transmission, Tulsa 45,000lbs hydraulic winch and has 2016 Jurop PN84 vacuum...