Used Equipment Forestry Equipment For Sale In Lowell

EQUIPPED WITH 6 FLARED X156 TEETH. 50MM FRONT PIN, 50 MM REAR PIN, 6.5" BETWEEN EARS, 11.5" CTR - CTR FRONT PIN HOLES, 16" CTR - CTR REAR PIN HOLES. 36" WIDE GENERAL PURPOSE DIGGING BUCKET.

32" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 3 FLARED TEETH & 2 STRAIGHT TEETH [1073550], 3 BOLT CAT-STYLE SIDE CUTTERS, CLEVIS EYE ON BACK AND DEAD PINS. MEASURES 13 7/8" BETWEEN THE EARS, 19" CTR - CTR, AND 80MM FRONT & REAR PINS.

GOOD WORKING TAKE OFF. OPENED AND INSPECTED.

MEASUREMENTS ARE 10 3/4" BETWEEN THE EARS, 17" CTR - CTR, AND 70MM FRONT & REAR PINS. DOES NOT INCLUDE DEAD PINS. 38" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 5 FLARE TEETH [1U3302], SIDE CUTTERS, AND A HOOK ON BACK.

$400 minimum order. Lots of wonderful used tires, not good for high speed highway driving. Also 315,385,425 ,700 x22.5s. You are taking a chance(tires can be a mystery ,no one knows) that you might be buying junk.

2,600 gallon water tank(seperate)Makita gasoline motor, with pump 3" 265 gallons per minute, 700 gallons of fuel. Fuel pump filter gas station type nozzel , This bed has lots of plumbing.

HOME MADE HYDRAULIC THUMB. 45" GP BUCKET WITH 9'9" STICK. CALL FOR MORE INFORMATION AND PRICING.

REMAN HYDRAULIC PUMP $18,450.00 NEW

11 foot pull out deck . 65 foot totally stretched. 29 foot rear deck over tandem. One owner since 2008. 36" king pin setting. Peter Kiewit and sons owned.

SPRING SUSPENSION, PINTLE HITC , 24 FT TILT DECK. GVW 48,200LBS , 40,000lbs TDT capacity .

Model: 200 BARRELL

Very low hours. 14 cubic yards water level. 20' PULL TYPE - ONLY ONE ON THE LOT!!! USED, In near perfect condition. Self Contained Hydraulics, Tandem Motors On Gear Box, 1000 RPM PTO, Bar Type Chain Conveyor - 33 1/2" Wide Pintle Chain, Conveyor Drive...

ENGINE ARRANGEMENT# 4N7671 ENGINE IS OUT OF A CAT 637D S/N: 23W0638 MOTOR SCRAPER. WE WILL DO FINAL INSPECTION BEFORE DELIVERY REBUILT BY MCCALLISTER MACHINERY WASHINGTON, IN. GOOD RUNNING TAKE OUT.

24" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 4 STRAIGHT TEETH [X290], 5 BOLT SIDE CUTTERS, OVAL CLEVIS EYE ON BACK, AND DEAD PINS. 12" BETWEEN THE EARS, 17" CTR - CTR, 80MM FRONT & REAR PINS.

Flatbed with 2) 500 gallon steel tanks.

48" GENERAL PURPOSE DIGGING BUCKET EQUIPPED WITH 6 TEETH [8J3352].

HOME MADE HYDRAULIC THUMB. 9'9" STICK WITH 45" GP BUCKET. CALL FOR MORE INFORMATION AND PRICING.

ROOD RUNNING TAKE OUT OF A CAT 637D S/N: 23W0638 CALL FOR MORE INFORMATION AND PRICING.(219) 696-8911

Like New !! Used 1 time !! 72" Wide Blade

AIR RIDE SUSPENSION, TAILGATE ..Nice liner. Two way tailgate.

CAB, HEAT, AC, MECHANICAL CONTROLS, HYD.

16' TRUCK MOUNT Bar Type Chain Conveyor - 33 1/2"W Pintle Chain Frame Rails & Floor - 3/16" Plate (ga) Front & Rear Ends - 10 ga Direct Mount Hydraulic Pump Tandem Gear Case 1 1/2" x 1 1/2" Angle On Interior & Exterior of Hopper Ends 30" Spinners D88k...

Pump Model: 200 BARREL 8)New virgin matched radials. DOT 407 ,42 foot, spring susp, alum tank, Garnet SeeLevel special 4 in.