Used Equipment Engine Control Modules Ecm For Sale In Spring Valley

This well-designed unit is a complete drop-in replacement control and circuit board for BouMatic-style detachers. It features easy programming, LED indicators, and choice of automatic or manual modes.

The Coburn Replacement Print Module for Surge 12-unit pulsation controller is even better than the original: Featuring a simple direct setting of 11 speeds and 11 ratios, LED indicators of front and rear valve actuation, and LED indicator of short circuits,...

The print module (circuit board) is fully short-circuit protected and fitted with 20 amp screw contacts to ensure against connector burn. This pulsation controller for Strangko & Bou-Matic pulsators is the cost-effective way to run a string of pulsators...

The Kleen Flo S-12 pulsation controller for Surge has a 24 VDC output with a plastic enclosure. 12 Units Ratio from 50:50 to 70:30 16 Adjustable positions from 60 to 190 PPM Voltage input 120

This 24-unit pulsation controller from Interpuls is : Programmable, for rippling pulsation and a wide variety of speeds, ratios & milking conditions Features microprocessor & quartz timing Designed to minimize heat and stabilize output current to the...

Replacement Print Module for PCSB16 controller.

For Strangko 12 Volt Pulsators. This pulsation controller for Strangko & Bou-Matic pulsators is the cost-effective way to run a string of pulsators in the barn. 18-Month Warranty. Featuring green running indicators and red line fault indicators, this...

Replacement print module for 10067.

The Strangko Controller is simply the best-designed, best built, most accurate controller you can buy, and it offers the largest number of pulsation ratios and speed combinations on the market.

The Coburn Replacement Print Module for Bou-Matic 12-unit pulsation controller is even better than the original: Featuring a simple direct setting of 11 speeds and 11 ratios, LED indicators of front and rear valve actuation, and LED indicator of short...

In addition to the convenient touch-screen feature, this Pulsation Controller has an appealing compact design and, at 6 lbs., is much lighter weight than other 24-unit controllers.

Interpuls Transformer will fun up to 24 LP Electronic pulsators and features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 13 lbs.

The print module (circuit board) is fully short-circuit protected and fitted with 20 amp screw contacts to ensure against connector burn. This pulsation controller for Strangko & Bou-Matic pulsators is the cost-effective way to run a string of pulsators...

Transformer will run up to 36 LP Electronic Interpuls Pulsators or 26 ACR Parlor Detachers. It features: Anodized aluminum frame Resin-sealed internal parts Short-circuit protected output channels Weight 10 lbs.

If you place your order now we will call with the shipping rate. If you do not wish to place your order now you can click "ask a question about this products". Please enter your zip code and we will respond with a quote.

For more information, please click here ! Optional Equipment Wheel assembly Side blinders on branding doors Dimensions Length: 140" Width: 47" Height: 92" Weight: 1325 Lbs. Shipping Information This item does NOT ship for free Shipping charges will apply...

Standard Equipment Heavy-duty manual headgate Flex cutting gate or drop gate (Choose from options below) Humping bar Palpation cage Side exit Six branding windows Removable bottom side panels Adjustable squeeze 10-gauge diamond plate floor Optional Equipment...

Bolt-On Drop Gate or Flex cutting gate (choose option below) Heavy Duty Manual Headgate Humping Bar Palpation Cage Side exits on both sides Retraining Pipe Ratchet bar side squeeze Manual Headgate Extension Dimensions Length: 10' Width: 32" Height: 6'...

Manual Variable Speed Fan Control is moisture proof. Rated at 115/230V, 12.5 amps, it is suitable for a string of six VS12 Barn Kooler fans or six VS20 or VS24 Barn Kooler fans, or similar fans.

115/230V, 50/60 hz, 12 FLA amps, single stage. Rugged, sealed case measures 6” x 6” x 3.75” and includes 1 ft. Internal settings include temperature differential, minimum speed, auto shut-off mode and 2-second full start mode.

115/230/277V, 50/60 hz, 16/12/10 amps. Rugged weather-resistant case measures 3” x 6.5” x 2.5”. May also be wired for heating for use with heaters or heat lamps. Single Stage Moisture Proof Thermostat has large visible dial to set temperature from...

For more effective cooling in open air shade structures, install Mist Kits. Misting aids in reduction of heat stress which can affect milk production, inhibit livestock weight gain and cause too much water intake.

Wall Mounting Bracket for 12", 20" or 24" Barn Kooler Fans model VS12, VS20 and VS24.

Wall Mounting Bracket for 36" Barn Kooler Fans.

Single Speed Moistureproof Thermostat. Will handle two VS36A, VS36B or VS24 fans.

Rugged, sealed case measures 6” x 6” x 3.75”. Manual Variable Speed Control has on-off switch and manual variable output knob. 115/230V, 50/60 hz, 12 FLA amps, single stage. Control will handle one or two VBS24 fans and has a 15 amp overload protection...

Mounting Bracket extends 42" to is recommended for 24" or 36" Barnstormer Fans (VBS24, VBS36A or VBS36CF).