Used Equipment Cooling Assemblies Rad , Cond , Ataac For Sale In Spokane Valley

The ITP205 Assembly for sheep includes two claws, 0/385 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP205 Assembly for sheep includes two claws, 0/301 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply to each liner during both milking and washing. Then, when the teat is removed at the end of milking, rapid air intake creates a...

The ITP205 Assembly for sheep includes two claws, 0/300 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP205 Assembly for sheep includes two claws, 0/386 liners and shells as well as splitters, bracket and other tubing for a ready-made sheep milking assembly.

The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply to each liner during both milking and washing. Then, when the teat is removed at the end of milking, rapid air intake creates a...

The Vanguard Milking Claw Assembly includes two 0056/0002 silicone liners, two 2200/3211 plastic shells, silicone milk tubing and clear air tubing for a ready-made goat milking assembly.

The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply to each liner during both milking and washing. Then, when the teat is removed at the end of milking, rapid air intake creates a...

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

The Vanguard Milking Claw Assembly includes two 0/524 silicone liners, two 2200/3209 plastic shells, silicone milk tubing and clear air tubing for a ready-made sheep milking assembly.

The ITP207 is an individual milking claw incorporating a shut-off mechanism which automatically controls the vacuum supply to each liner during both milking and washing. Then, when the teat is removed at the end of milking, rapid air intake creates a...

Number "3" on schematic diagram.

Number "6" on schematic diagram

Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors. Weighs 121 Lbs. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Number "2" on schematic diagram.

Number 5 on schematic diagram.

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

Number "8" on schematic diagram.

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air...

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air...

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air...

Bucket, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft. Of Vacuum Tubing. Order Milking Cluster separately. Included in the assembly are 65 lb. Fully-approved high polish stainless steel Bucket has hand grip and reinforced bottom.

Poly Bucket, Storage Lid, D/L-style Milking Lid, Vacuum Pulsator (60:40 ratio), Adapter and 8 ft. Of Vacuum Tubing. Order Milking Cluster separately. Included in the assembly are 40 lb.