Used Equipment Conventional Trucks W Sleeper For Sale In Brookshire

These trucks will haul grease, septic, water, sludge, mud, and HAZMAT material for your specialized jobs. Very, very powerful Wittig HYDRAULIC vacuum pump. 2 Available: One has 18,000 miles and the other has 23,000 miles.

This truck has been serviced at the Peterbilt dealer as well. PTO is activated outside of cab on drivers side, with clutch lever and pto lever so you dont have to hop in the truck to activate pto.

2006 Mack CHN613 Vacuum Truck with 413,000 miles. Mack 427HP engine, eaton fuller 13 speed, NVE vacuum pump with transfer gear pump too, tandem axle, air ride, 3,500 gallon vacuum tank, 3.90 ratio, 230"in wheelbase, 12,000lbs fronts and 40,000lbs rears.

Spring suspension, heavy spec, double frame. Truck is powered by the very reliable and legendary Mack E7 engine. 2001 Mack RD688S Bobtail Kill Truck/ pressure truck/ pump truck with 60BBL Vacuum tank, with 260,000 miles, Gardner Denver Tee Triplex pump...

Fresh engine oil change. Truck sells ready to work, DOT inspected. 2008 International 7600 Vactor HXX Hydroexcavator with a big blower, Hibon 8702, 29"HG, 5600 cfm, Caterpillar C13, Eaton Fuller 10 speed, full open rear gate, full tilt tank, it has an...

Maxitorque 9 speed transmission, Mack AC380 engine, 380HP, chrome cumper, chrome exhaust, mack orginal chrome mirrors, 90% tires all around, aluminum wheels fronts. G&H 60,000lbs roll off cable hoist.

Hendrickson Walking beam suspension, 20,000lbs fronts and 58,000lbs rears. Truck sells DOT inspected, ready to work. Beautiful monster 2006 Mack Granite CV713 Gin Pole Winch Truck with 123,000 miles!!! Mack AMI 12.0L engine, 338" Wheelbase, 29" poles,...

Truck will be painted and will have all warning and hazard decals from manufacturer. Tandem axle, full tank tilt and full open hydraulic rear gate. All gauges in control panel working and inside cab, no check lights, or leaks.

Can ship anywhere or pick you up at the airport. These trucks are working good, and have no problems. One has 60k miles and the other has 102k miles, Cummins ISX 475HP, Eaton Fuller 18 speed, Gardener Denver TEEAC 5,000psi pump, MCM 3X4 pump, NVE Challenger...

Tandem axle, full tank tilt and full open hydraulic rear gate. Blower hours are 3,002 hours. The dash on interior is very good, no broken pieces on dash or cracks. All gauges in control panel working and inside cab, no check lights, or leaks.

Eaton Fuller 10 speed, double frame, heavy spec, 20,000lbs fronts and 46,000lbs rears. All fully working. Temperature enclosed cabin with blower, water quintuplex pump and heater boiler stored in there.

Hydraulic tank tilts and full open hydraulic rear gate. With 14,000 original miles (computer verified) and 8,000 hours. This truck has been fully refurbished and is ready to work. Has NVE air safety valves on the rear.

It has full rolling tailboard, hydraulic Tulsa 45,000lbs winch and a hydraulic NVE 367 Challenger vacuum pump, 14,000lbs fronts and 40,000lbs rears. Real clean truck, no check lights, air leaks or oil leaks.

Can haul frac tanks and you can haul vacuum tankers with the pump, or use the winch to assist with loads. Truck is ready to work, DOT inspected. 2007 Mack CH613 Winch Truck with a vacuum pump, ready to work.

Nice truck, everything works as it should. Truck runs good, no check lights. 2007 Sterling Roll Off truck, tandem axle, Eaton Fuller 10 speed, 18k fronts and 44k rears, spring suspension, double frame, Mercedes Benz 460HP engine, 491,000 miles, clean...

Runs nice, no problems No check lights, oil leaks or cylinder leaks. Powerd by Cummins ISM, Allison 4500 automatic transmission. Heavy specs, 20,000lbs fronts and 53,000lbs rears on Hendrickson spring suspension.

PTO, Braden 45,000lbs hydraulic winch, half roller in the back, sliding adjustable 5th wheel, big 385/65/22.5 tires in the front, inside operators cab controls. 20,000 fronts and 46,000 rears.

Water pump and blower have a lot of power. Uraca KD708GS 2,500psi triplex pump at 60gpm with a Roots 824 RCS Blower at 4,460CFM. Caterpillar C7 engine, Allison automatic transmission, heavy spec, double frame, walking beam spring suspension, 20,000lbs...

Ready to work, DOT inspected. With NVE air safety valves. 2004 Freightliner Business Class M2 single axle DOT CODE 407/412 Vacuum Truck with 88,000 miles. Mercedes Benz engine at 230HP.

Fresh paint and ready to work. 2009 FREIGHTLINER BUSINESS CLASS M2, Cummins 6 cyl, 30,000 original miles and 13,000 hours on engine. 8 speed, double frame, Hendrickson spring over beam suspension, 16,000 lb frt, 46,000 lb rears, 2010 Keith Huber tank...

Differential Lock, State DOT, Turbo Galbreath roll off hoist, pioneer strong arm hydraulic tarp, tarp extends, brand new tarp cover, tarp hoist raises as well. Pre- emission, no DPF or DEF.