Used Equipment Construction For Sale In East Syracuse

30" CP HD BUCKET FOR A JOHN DEERE 130/135, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth, Width: 30"

LABOUNTY HDR100S, HDR100209, GRAPPLE ATTACHMENT, SK480 MOUNTING, 52" WIDE, MANUAL POWERED, 2/3 TINE, # 71314

SS 42" FORKS & FRAME 3750#

GEITH HD40-036, 239622, 36" WIDTH, DIGGING BUCKET, .71 YD YD CAPACITY, 130LX MOUNTING, 65MM PINS, 255MM DIPPER WIDTH, SIDE CUTTERS

3 CuYd GP PIN ON BUCKET WITH BOCE FOR A JOHN DEERE 544, Fits On (machine Category): Wheeled Excavators, Connection: Pin On, Gets: Cutting Edge, Capacity: 3, Bucket: General Purpose

2013 KENT F35QT, F35 31134, SK260 INITIAL MOUNTING, 6000 FT. LBS IMPACT, 320-600 BPM, # 78253 Pin Diameter: 90MM Stick Width: 326MM

GEITH HD30-018, 206897, 18" WIDTH, DIGGING BUCKET, SK35 MOUNTING, 40MM PINS, 141MM DIPPER WIDTH, 4 TEETH

BLOWS PER MINUTE: 250-350 2014 KENT/FRD/FURUKAWA HYDRAULIC HAMMER, MODEL: FX475QTV, MOIL POINT, CARRIER RANGE: 39-61 (US TONS), OIL PRESSURE 2,320-2,610 PSI, REQUIRED OIL FLOW 53-79 GPM'S, IMPACT ENERGY CLASS: 8,500 FT.

HELAC POWER TILT COUPLER TT10-M63326-210 FOR A JOHN DEERE 595D, Coupler Mfr: HELAC, Fits On (machine Category): Wheeled Excavators, Drive: Hydraulic

NEW HOLLAND 716925016, 230434, 78" WIDE, 4X1 BUCKET GREAT CONDITION.

6.5YD HD G/P BUCKET FOR HYUNDAI HL780, GREAT CONDITION, NEEDS BOCE.

2017 LABOUNTY MHP200 HYDRAULIC CONCRETE PULVERIZER, 4,850 LBS, MIN EXCAVATOR SIZE OF 44,000LBS, CYCLE TIME AT MAX FLOW: 4 SECONDS, JAW OPENING 37 INCHES, JAW DEPTH OF 33 INCHES, REACH OF 7.5FT TO MOUNT TO EXCAVATOR THAT HAS THE FOLLOWING DIMENSIONS: 80MM...

GEITH HD50-042, 206947, 42" WIDTH, HD DIGGING BUCKET, 1.35 YD CAPACITY, R250LC MOUNTING, 90MM PINS, 400MM DIPPER WIDTH, SIDE CUTTERS, V33SYL TEETH PIN SIZE: 90MM, STICK WIDTH: 400MM

Werk-Brau 24" excavator bucket, .86 yd capacity Pin Diameter:: 90MM Stick Diameter: 382MM Fits Kobelco SK290-SK350 *Condition subject to change. Pictures are from when the bucket was received new.

MOIL BREAK BIT, 5.51" DIAMETER, FITS MODEL: F27 KENT/FRD

Recommended Carrier Weight: 10,000lbs.-19,800lbs Excavator & Loader Backhoe

GEITH HD50-042, 228300, 42" WIDTH, DIGGING BUCKET, SK260 MOUNTING, 90MM PINS, 327MM DIPPER WIDTH, SIDE CUTTERS, QTY 5, ESCO 158 X 330 TEETH

GEITH HD58-060, 206961, 60" WIDTH, DIGGING BUCKET, R320-R450 MOUNTING, 100MM PINS, 432MM DIPPER WIDTH, SIDE CUTTERS, 5, V43SY TEETH, # 29321

GEITH HD60-054, 93223, 54" WIDTH, HD DIGGING BUCKET, 2.51 YD CAPACITY, SK400-480, 460LX MOUNTING, 100MM PINS, 452MM DIPPER WIDTH, SIDE CUTTERS

2003 C&P P1000LM, 1182-82840-1, 10CU. YD CAPACITY, SNOW BUCKET, 90ZV MOUNT

2017 BRADCO RS24 ROCK SAW, 60" WHEEL DIAMETER, 24" MAXIMUM CUTTING DEPTH, 4" CUTTING WIDTH

NEW HOLLAND 741500019, 031031205, 1.50 CU YD CAPACITY, G/P BUCKET TYPE, PIN-ON, LB115 MOUNTING, # 24347

Werk Brau 60" Excavator Bucket, 2.40yd Capacity Pin Diameter: 90mm Stick Diameter: 382mm Fits Kobelco Sk290-sk350 Condition Subject To Change. Pictures Are From When The Bucket Was Received New.

3/2 GRAPPLE, INITIAL MOUNTING FOR KOBELCO SK350 W/90MM PINS, STICK WIDTH OF 382MM

500 FT-LBS 600-1,800 BPM Hyd Flow Requirement: 9-24gpm Hydraulic Pressure: 1,300-2,050 PSI -Single body concept offers noise and vibration insulation while protecting cell. -Durability: Longer tool life due to the accommodation of a thick tool which ensures...

24" HD BUCKET FOR A JOHN DEERE 310 BACKHOE, Fits On (machine Category): Backhoe Loaders, Strength: Heavy Duty, Gets: Teeth, Width: 24"