Used Equipment Construction For Sale In Buffalo

Like New Fits DB linkage 100MM 90 MM Pins 60 Inch Wide

Cab Information: Cab Manufacturer: Volvo Type of Cab: EROPS Cab If EROPS Cab, is Certification Tag present?: Yes Is Cab Equipped with/for AC?: Yes Condition of: Cab Shell: The cab shell is in very good condition overall.

Description: All of the pin holes on this boom appear to be in decent shape. Dimensions for shipping: 6 feet, 3 feet Wide, 22 feet Long Weight: 6,200 lbs. No cracks or repairs have been found..

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 20 feet Long The machine this boom was on had burned and the base of the boom has taken a little heat from the fire. No warping appears to be present.

Dimensions for shipping: 5 1/2 feet High, 2 1/2 feet Wide, 19 1/2 feet Long On the LH and top of this boom, where it pins to the machine has been repaired and plated (see photos). The rest of the boom looks good.

Dimensions for shipping: 1 1/2 feet High, 3 1/2 feet Wide, 14 feet Long Dimensions are of the stick laying on its side. There are no cracks or repairs present on this stick. Weight: 2100 lbs.

Dimensions for shipping: 2 feet High, 3 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to the bottom of it.

Description: All of the pin holes and all of the pin boss surfaces look good on this boom. Dimensions for shipping: 3 feet High, 5 feet Wide, 11 feet Long Weight: 3,800 lbs. No cracks have been found.

Stick Information

CONTROL LINKAGE HAS SOME WEAR. LIGHTS, GAUGES, HEATER ARE IN GOOD CONDITION. VINYL SEAT HAS A FEW TEARS IN IT. ALL WIPER ARMS MISSING. HAS A/C WHICH IS NOT WORKING.

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long All of the pin holes appear to be in good shape and no cracks or repairs have been found. This stick has a thumb mount welded to it.

Dimensions for shipping: 2 1/2 feet High, 3 1/2 feet Wide, 9 feet Long All of the other pin holes appear to be in decent shape, althought some of the bushings are showing some wear.

Repairs/Modifications: The moldboard has been refaced and hard-facing applied to it. The moldboard has been refaced with a series of seven plates that run the width of the blade and hard-facing has been applied to it, just above the cutting edges.

Description: All of the pin holes appear to be in good condition and no cracks or repairs have been found. Weight: 1,800 lbs. Dimensions for shipping: 5 feet High, 3 feet Wide, 16 feet Long

GEARAMATIC WITH DRIVE SHAFTS.

Description: All of the pin holes on this boom are in good shape and no cracks have been found. Weight: 1,500 lbs. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 15 feet Long

*THESE TRACKGROUPS WILL FIT ANY EXCAVATOR WITH THE SAME PITCH AND LINK COUNT NO MATTER THE MAKE OR MODEL* RATE 6 ESTIMATED PERCENTAGES FOR BOTH LH/RH SIDES: GROUSER HEIGHT: 70% LINK HEIGHT: 60% BUSHING OD: 60% PITCH: 60% MFG: KOBELCO SEALED TRACK TYPE...

Description: All of the pin holes on this boom appear to be in good shape. Dimensions for shipping: 4 1/2 feet High, 2 feet Wide, 14 1/2 feet Long Weight: 2,000 lbs. No cracks or repairs have been found.

Weight: 2,200 lbs. Dimensions for shipping: 2 feet High, 4 feet Wide, 15 feet Long. The working length of this stick is 10 feet, 1 1/2 inches or 3.05 meters. This stick is missing both outer bushings for the bucket pin.

Boom to mid-section cylinder-The working condition of this cylinder is unknown. All of the pin holes appear to be in good shape and no cracks can be seen. Jib-section-13 1/2 foot long jib section.

RECEIVED CAB GLASS NEW... NOT INSTALLED ...

Dimensions for shipping: 2 feet High, 3 1/2 feet Wide, 13 feet Long This stick has whats left of a thumb mount, welded to it. Weight: 1,600 lbs. There two cracks on this stick (see photos) near where the stick cylinder pins to it.

Dimensions for shipping: 7 1/2 feet High, 3 1/2 feet Wide, 24 feet Long 6.6 METER Weight: 9,000 lbs.

Dimensions for shipping: 1 1/2 feet High, 4 feet high, 15 1/2 feet Long All of the pin holes look good and no cracks have been found. This stick has had a thumb mount cutt off it and because of this ,it has a few light torch marks burned into it.

Description: All of the pin holes appear to be in good shape and no cracks have been found. Weight: 4,500 lbs. Dimensions for shipping: 5 feet High, 3 feet Wide, 21 feet Long