Used Equipment Construction Equipment For Sale In Wittenberg

18" wide, 13 1/2" inside mounts, lightly used, v bottom, black in color, quick tach mounts

17" stick width, 3 15/16" pin dia, 21" pin spacing, replaceable tooth

39" wide, 3 1/8" pin diameter, 12 3/4" stick width

12' wide, 7' 6" deep, 5' 7" tall, 49" center to center lift arms, 3.5 top pin diameter, 4.25 lower pin diameter, 3.5 boss width, 8 teeth (like new) spade nose, came off a Clark Michigan 275C loader

65MM pins, 255" inside mounts, approx 2 1/2" - 2 9/16" pins, 10" inside mounts, 15" pin to pin, 31" wide, 5 teeth

88" wide, 84" sweep width, hyd angling, spring loaded, excellent broom cond, mech kick stand, skidsteer quick tach, 2 line hyds

11' rock/root rake, 5 teeth, w/outside mount arms

24" wide, 9 1/8" inside mounts, 2 3/8" pin dia, 15" pin to pin, 4 teeth, used/good condition, rear lifting eye

12" wide, 10 1/4" stick, 9 3/4" curl cyl, 14" pin to pin, 2" stick pin dia, 1 3/4" curl pin dia, 3 teeth

SKIDSTEER BUCKET, 72" WIDE, 32" DEEP, 20" TALL, WELD ON CUTTING EDGE, STANDARD SKIDSTEER COUPLER

50" wide, 15 1/4" stick width, 3 1/2" pin diameter, 19 1/2" center to center

60" wide, 5 1/2 x 3" bottom wear plates, universal quick tach, designed for loaders w/1,300# cap, gray in color, new

13' 6" wide, quick tach mounts, spring loaded cutting edge.

10' 1" wide, 43" tall, 8' long, very low hrs of use, came off a JD 700J dozer, reversable cutting edge

Forklift mast w/cylinder & carriage, 3 stage

39" wide, 12 1/4" inside mounts, 17 1/2" pin to pin, 3 1/8" pin dia, 5 teeth w/ welded on smooth edge, rear lifting eye, very good condition

SKIDSTEER BUCKET, 72" WIDE, 32" DEEP, 20" TALL, WELD ON CUTTING EDGE, STANDARD SKIDSTEER COUPLER

80mm pins, 311 mm inside mounts, 12 1/4" inside mounts, 3 1/8" pin diameter, 18 1/8" pin to pin, 45" wide, 5 teeth, yellow in color

Set of 2 rails w/pads & 2 idlers, 40 links, 24" pads, 30%

30" wide, 12 5/16" between mounts, 17 1/2" pin to pin, 3 1/8" pin dia, 4 teeth, side cutters

1" diameter cable, mechanical driven winch, controls, green in color

80 mm pins, 311 mm inside mounts, (12 1/4" inside mounts), 3 1/8" pin dia, 18 1/8" pin to pin, 45" wide, fits Cat 318, 320L, 320BL, 320CL, 322BL, EL200B and others, 5 teeth

9' 11" wide, 3 15/16 dia curl pin dia, 3 5/8" curl cylinder width, 4 7/8" dia loader arm pin dia, 4 5/8" loader arm bracket width, 3.5-4 yard cap, bold on cutting edge, like new condition

75" center auger to tip of chain, has 11 sand paddles (missing most), has crumbler arm, 6 bolt

72"x42"x30", .6 yard cap, 2,200# rated cap, 2 line hyds, standard/skidsteer quick tach

11 3/16" inside mounts, 2 3/4" pins, 18 1/4" pin to pin, 30" wide, 4 teeth, side cutters, rear lifting eye

SKIDSTEER BUCKET, 72" WIDE, 32" DEEP, 20" TALL, WELD ON CUTTING EDGE, STANDARD SKIDSTEER COUPLER